Maxtrac Suspension (750920-8) 2" Front Lift Coil for GM Silverado V8 Engine

Had these Maxtrac 2" coils installed with the Maxtrac 3" lift spindles, Bilstein 5100 shocks, and all new factory replacement front end kit from 1AAuto.com. Truck rides awesomen, just a tad bit stiffer than stock but I'm assuming the springs and shocks will settle and soften up with a few miles on them. Would highly recommend this setup. Gives the truck a pretty significant lift and awesome ride quality with out sacrificing performance. Would also add, pretty budget friendly setup!

I am super happy with this package. I didn’t want to do a lift but I wanted to level out my truck. The ride is not at all as bad as my friends warned. I actually really like the feel of stiffer springs. I was advised to go with the bilstein 5100s so I did. Those are pretty great too. Installing was about 4 hours with a buddy who is a mechanic. I also looked at the spacers you can buy but it made sense to me to purchase more spring and higher grade shocks on the truck.

These lifted my '06 Silverado 1500 2wd truck front end to fully level with the rear. The ride is significantly stiffer than before. The ride on the 10 year old worn, sagging OEM springs had become too soft and bouncy. The new ride is a little too stiff for my liking, but may settle in over time and is in my opinion an improvement over the original.OEM shocks are now close to topped out. Haven't noticed them topping out yet over bumps, but may need replaced.

Pretty amazed on the height these lift coils will give your Silverado! Installed these coils on a 04' Silverado 2WD with a 6" Rough Country lift kit paired with Freedom Offroad upper control arms. Everything needs to settle in, but as of now I gained 2.75" driver side and 3" on the passenger side so now my truck is a bit higher up front than the rear. Not the look I was shooting for, but dosen't look bad at all to me. I'm running Moto Metals 0962 20x10's wrapped with Cooper Discover AT3 35x12.50. No rubbing after some minor front bumper trim.Over all this a great lift coil for the price and shipping was on time.

2006 2wd silverado. 3 inch spindle. 2 inch coils. 3 inch blocks. Stainless long break lines. 17x9 -12 wheels 295x70 17 nittos. Lift shocks.

worth the purchase, with 3in spindles was able to clear 35s minimal rubbing at full lock. ( recommend buying billstein 5100 shocks)

I ordered the wrong part but it was correct to their description. They refunded me with no questions. Even though the part was of good quality and would have met my expectations if I had of paid attention.

I had these installed on my 2004 silverado along with 3 inch lift spindles these coils gave me a full 2.5 to 3 inches of lift. ,,,,You will definitely need longer front shocks procomp es3000 part# 318510 works perfectly on my 2004 silverado, rides smooth as stock but just a little firmer, this is a excellent coil