Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White

If you're looking for IR sensor switches to automatically turn on lights when you enter the room, then turn them off when the room is empty, get these sensors and don't hesitate to pay a little extra. They require no neutral wire, but still work flawlessly in 2-way arrangement (two switches controlling the same lights--either sensor turns and keeps lights on when motion is present) as well as with circline and other fluorescent lights with newer electronic ballasts. My first purchase was for sensors found at Home Depot. After installing these, I learned that a small amount of current trickles through the switch to run the infrared sensor, and this low current is enough to cause electronic ballast to try to start--hence the HD sensors caused my fluorescent bulbs to flicker even when no motion was present. My second attempt was my own failure to read the details on Leviton IPP15 and IPP0R sensors. I read the "Manual On" as an infrared sensor with a "manual-on" override switch similar to the ones I bought from HD. These DO indeed work with electronic ballasts, but they ONLY come on via the manual button--then turn off when motion in the room stops. When I bought these ODS10-ID switches, install was a breeze and everything worked the first time. I was very pleased. One very minor disappointment is that the inactivity timeout settings allow for either 30 seconds or 10, 20, or 30 minutes. I'd think a 2 or 5 minute timeout would be ideal, but is not an option. They call the 30 second timeout a "test" mode, which is fine for testing switch operation, but we also found it is ideal for things like a laundry or utility room. You don't stand motionless there and if it doesn't sense movement for 30 seconds, the room is likely empty. We have the 2-way switches set for 10 minutes in the basement. Note: NO NEUTRAL IS NEEDED for these, which is impressive and makes installation a breeze. Somehow, they found a way to run the infrared sensor with a little current without tripping the electronic ballasts. But these sensors are great and my wife smiles at me every time she goes into the basement and laundry room with arms loaded with laundry and the lights greet her without effort.

Bonne qualité bon prix très facile à programmer Merveilleux

Lástima que esté descontinuado

Very good unit. I have installed 5 of these in various spots and they work great. Lots of adjustment to fit any situation.

Initially purchased a cheaper Leviton ($25) occupancy switch from a local hardware store to control a 4-tube flourescent fixture in our garage. Initially the switch worked great but it eventually failed to turn on 2 of the four tubes using the motion sensor. (all four tubes lit with the manual-on overide). After researching online, I came across this switch which works with both Magnetic and Electronically ballasted flourescent fixtures so I decided to spend the money. Installation wasn't too challenging but did require the use of an a/c probe to determine which of the two black wires was the line "hot" and which was the load (light). Set up was also a breeze with the adjustment dials being easy to understand and dial-in. This switch just went in and it's working perfectly with no flickering or problems so far. All four tubes of the overhead fixture fire up with any motion and the manual on/off is a great feature to have as you can simply turn the lights off or on and not worry as the motion sensor resets after the selected time out period with no motion. The unit is also much more sensitive than the previous model, picking up the initial motion of the garage door opening so the lights are on by the time the garage door is fully open. I would love to purchase more of these swiches for closets and other areas where lights are frequently left on.