Brushbar Roller Brush Replacement for Dyson V8 Cordless Cleaner Part 967485-01

It fits Dyson 11 roller. Its much thicker then original. Works great . Good value.

When you first install this new brush roll, the bristles are quite stiff and when used even on low pile carpet it will stall out the motor. Use it for about 5 or 10 minutes on regular hard flooring to help get the bristles conditioned. After that, run it on carpet, low or thick, but only pull it backwards. Lift it off the carpet, move it forward, set it down, then pull backwards. After a few minutes of this, the bristles will be broken in and you will be able to use it as normal. It works REALLY well after the break in - I'd say even better than the original Dyson brush bar. This new brush bar restored my knackered old Dyson into a beasty cleaning machine again. I also did a full tear down of the cyclone and cleaned it and replaced the filters. I spent maybe $50 between all the parts and my old V6 runs like new again. Last year I replaced the battery with an aftermarket and it's worked really well too. It still holds a strong charge. All that to say, its worth refurbishing these Dyson's as they have more life in them their few worn out parts. Worth the investment of time and a few dollars to keep it running like new and out of the landfill.

These replacement rolling brush strips are a solid solution if your Dyson V8 or V10 vacuum starts to feel sluggish or the suction head isn’t moving smoothly. Installation is straightforward, and the included screwdriver makes it easy to swap the old strips out yourself. As part of routine maintenance, it’s recommended to replace these every 2–3 months depending on how often you use your vacuum. The package comes with 4 strips and 1 screwdriver, so you’re well-stocked for a few replacements. The only reason I’m giving 4 stars instead of 5 is that they’re basic strips. Functionally they work, but there’s nothing fancy about them. Still, they do the job and keep your vacuum running smoothly.

READ FIRST_________The New Brush Did Not Fit At First. Then I noticed the old end bearing on the old brush had broken off-In the end Cap(The one you take off to remove the brush). Took a phillips screwdrive and worked the old/stuck bearing out of the end cap. Then installed the cap over the bearing on the new brush. Then reinserted the new brush, with the old end cap attached to it, back into the housing and used a quarter to lock it in.

The OEM unit was quiet and smoooooooothe. This one is like an out of balance washing machine on the spin cycle. I have taken this on and off a half dozen times to try to identify the problem. The only thing that I can find is a worn spot/scrape on the end where it is hitting the inside of the cup which holds it in place. I fear that it will eventually cause a failure of the motor or head. An update and edit. I bought another brand, and it worked like the OEM. Upon comparison, this vibrating roller has a 1/16" air gap between the plastic weld points on the end with the bearing and screw. The OEM and other replacement don't have this gap and fit flush to the end cap. That the only difference that I could find...other than the OEM bristles are different as well. Maybe the one I received is defective? I can't say for certain. Maybe it's supposed to be a 'beater bar"?

I purchased this set as it had 2 of each brush. We have a V11 Outsize and brush replacement options are not available. With this kit, I was able to cut 1 set of brushes to extend the brush for the larger roller. It has worked great and breathed new life into the vacuum.

100% Satisfied. I love my Dyson and was so disappointed that the brush roller is not available from Dyson. I watched a YouTube video of a guy who replaced the strips. I have a v11 outsize and these strips fit tightly. The brush bar for this model is longer so I had to use a full strip plus part of the 2nd strips that are provided. I could not be more pleased with this product, and I’m always skeptical of knock off replacements! You will not be disappointed! My $800 vacuum is now functional! The first photo is of the original worn out strips.

There was only 3 strips in package, two red and one black. Went ahead and used two they seam to work well but not sure if they will last.

This replacement brush did not fit my existing Dyson motor head. This may be because I have replaced the motor head previously, so I wouldn't necessarily criticise either Amazon or Dyson for this in this case I've just bought another motor head, which should solve the problem.

Es igualito al original. Funciona al momento en mismas condiciones, esperemos con el tiempo averiguar su durabilidad.

Impecavel. É tal e qual o original. Funciona perfeitinho

As good as the original

I really like these replacements bristles for the two different textures. Fit perfectly.