Solar Cynergy 120watt 12volt Monocrystalline Flexible-Bendable Solar Panel

Had it about 3 weeks and so far working great! A great value for the Wattage. My other panel after 2 years started to get a film and decrease charging power, probably expected and normal for being outside 100%. We'll see how this one does, but so far very happy.

❌ -The product sent is NOT the same as the picture! ❌- ALL 3 of them FAILED after 3 months ❌- customer service SUCKS and won’t take responsibility! I got 3 of these panels and mounted then to the top of my RV and ALL 3 started failing 3 mouths after installation (out side the warranty/return policy) they start to over heat and stop production of power in 70° weather... I live in Arizona so that is a MAJOR PROBLEM!! They told me to contact the manufacturer to resolve the issue. Very unhappy I have to uninstall them replace and reinstall!!! I would not recommend this product or this seller for any future purchases!

Bought 6 of these within the past year. Result? Only 2 are left that are good. 2 completely dead and the other 2 have hot spots that still have voltage. 1 of those hot spots burnt through the panel and through the protective laminate I placed underneath it! Without that layer I'm sure my RV would have caught fire! All worked great up until I reached our property in Colorado high county. The first 70 degree sunny day with extra uv put the cabosh on those panels. Disappointing. Asked seller directly about the warranty like his store says to do. Response was deflected to "contact manufacturer". "Only 30 day return policy". Tried looking up manufacturer. For what I see there is no company or there is no contract option for customers. This is typical for the distributor relationship in product marketing. There only communication is to distributors alone. For us customers wanting to contact the company. It won't happen. So in effect, there is no warranty. With this product, my advise is not place these panels on anything of value as they may destroy them by fire. They are cheap and will work in areas that are more cloudy than full uv exposure. You get what you pay for! Again. Not a warrantied item!

Thinner and more flexible than I expected. Perfect for my application. Hoping it holds up over time better than some other reviewers have found. Will update this review after six months or more of service, but after one month it’s doing what I hoped it would.

These panels arrived quickly and were easy to install and quality seemed cheap but no major issues. However, they are extremely sensitive to sun angle and don’t put much current out with anything other than perfectly angled midday sun. or less of rated in morning or late afternoon while adjacent high quality Kyocera (but lower wattage) panels were putting out double the amperage. No data yet on longevity or sustained performance. Expectations should align with price. Update - after approximately two years of use the panels are still working well. The power output is decent. These are not top of the line panels, but do get the job done at the price point. I had one lens crack while removing the bimini top they are installed on when the panel flexed excessively, but was able to mend it with clear tape and it is still working properly, for now.

I’ve now had 2 new sets of 4, that I wired 2 in series, x2 in parallel … to under great conditions get ~36-40v x 8-12amps in full sun into a 40 amp MPPT charge controller. I’ve never seen more than 16-18v x 3.5-4.0amps. Reason why, and I’m kicking myself as I thought I was just in bad sun conditions, only 1 panel has ever worked, after they were first wired together (correctly and within limitations). I knew they were ‘cheap’ and semi-disposable…. 3-5 years was acceptable for me. But now I’m kicking myself as I keep waiting over 2 years of use for better output to happen (>60w from 400-480w), that never happened, only to realize the panels were frying themselves when wired together except for 1, and I waited to test panels individually all that time and after purchasing 2 sets. Strangest part… it was a visible circuit burn in the first set that made me do tests… 3 were dead, but not the panel with the visible electrical damage, at it still works now. 😣 If you have low output and multiple panels, do yourself a favor and run tests on each panel.

Glad someone asked about removing plastic film. There were no instruction to remove film on panel recieved. Fortunately after one week parked on desert I was able to remove from installed panel. Maximum current 2.3 amps. After posting this review, I have since bought a second panel. I mounted flush on RV roof and second panel with 1/2 inch space between roof and panel. I have had no overheat issues.

Sturdier than the ultra thins making it much more bow resistent. Durable and fast charging.