Patented Aluminum Spike Beach Anchor | Ultra-Light Sand Anchor for Boat, Pontoon, PWC, Jet Ski or Kayak | Secure and Effective Watercraft Anchoring Near Shore, Sand-bar or in Shallow Water

I did not see anything else like this on the market. This beach anchor is really awesome. You can feel the quality the second you take it out of the box. It's shockingly lightweight that even my kids can swim with it to shore. It goes into the Florida sand like a hot knife into butter. The quality is what really struck me, it feels like something much more expensive. I ain't no welding expert but those aluminum welds and paint coating do really look great. It held our 26ft Sea Ray in place even on a pretty rough day on the water and it goes in completely and does not stick out of the beach to become a hazard. There are no sharp edges except for the part that goes into the sand, and even that is not sharp enough to cut anything or anybody. The sand washes off relatively easy and it small enough to store in any compartment. Good luck finding a better beach anchor for this price. I forgot to take pictures last time we were on the water but will try to take them next time.

Worked amazing in dry sand and calmer waters. We did have a very high wind lake day and they held well for the most part, on a couple of occasions they let loose and needed to be reset. Definitely something you would have to keep an eye on while enjoying the day but overall works for our 21ft jet boat with weight a little under 4,000lbs with a wake tower. We did purchase the appropriate size based on length of boat and wake tower. Also wouldn’t recommend using them with wet sand or waves in sand. They came loose very easily in these conditions. They’re very light and easy to get clean. They’re also easy to use. But can be a bit harsh on bare feet when attempting to set them.

Great quality and does exactly what is subscribed!

I was SUPER frustrated with trying to keep the boat in place while at the sandbar. One minute it’s fine, next thing you know your boat has drifted into deeper water. Constantly checking, redoing, trying a different angle, etc.After 5 trips to the sandbar, this spike anchor system has proven to be very secure in holding our smaller (20’) pontoon in place on a pretty active lake. I’m super happy with how easy these go in compared to the auger style tie downs. You literally just push them down with your foot. IMO the reason it works so well is because it pushes in at an angle, but stays flat to the bottom of the water so there’s less leverage for it to twist or pull out.- I bought the longer ones- 18”- I bought two. Depending on the wind and waves I’ve done two at the front of the boat or one front and one back diagonally.- I paired it with (2) Sandshark 7-14’ bungee dock lines that come with carabiner style clips. Clips attach to the spike easily and the loop connects quickly to your boat cleat.- They weigh nothing and take up no space in the boat compared to the 5’ tube and auger.- WAY cheaper than the heavy duty auger pole system I was looking at. All in with the spring lines I was less than $200 for two.- I can’t imagine them wearing out. They’re one piece aluminum.That’s my take- I’ve had no issues.

Positives-light weight and molded well.-comes with decent mounting hardware. (Neg attached below)-works great if you find perfect sand or mud-Great customer service (one of the mounting hardware broke on installation) and they shipped an extra one out free of charge and very little questions asked.-worked well in softer sand/dirt at one location and held the boat overnight-CUSTOMER SERVICE IS THE BEST IN THE INDUSTRYnegatives-was not able to use it in hard sand/dirt- At regular price (more like a $50 to 60 option) Black Friday I believe it is $45 and that is an excellent purchase.- I think if anyone pays the current $86 option you will be disappointed (I paid for it on sale at $56). It is an aluminum stake. Do not pay nowhere near their full asking price on Amazon of $86.- IT needs a non-slip rubber mat on the top for it to work better (they stated a month ago one was on the way, but I have yet to see it. This will add some value if it stays on and is not a cheap grip.-hard plastic clips to hold it one broke with just minimal amount of tightening as the screw holes are small and cheaply engineered and molded (almost that of a 3d printer).UPDATE-WavesRX saw my review and sent a rubber grip to go on the top of it. IT is a decent grip however the customer service was over the top...Which makes me happy as they really seemed to care about thier feedback, business, and how people were going to be using.I am keeping this as an option on the boat, but if you are near hard sand or rock this is not going to be your only needed option.

Awesome anchor for waverunner. Small and lightweight, but holds tight while parked at sand bar.

I couldn’t be happier with the WavesRx Jet Ski Anchor! This anchor is a game-changer for keeping my jet ski secure, even in choppy water. The lightweight yet durable aluminum design makes it super easy to carry and store, and the bright anodized finish not only looks great but also prevents rust.It holds incredibly well in sand and mud, and the included rope and storage bag are high quality. Setting it up and retrieving it is effortless—way better than dealing with heavy or bulky anchors. If you want a reliable, well-built anchor for your jet ski, this is the one to get. Highly recommend!

Awesome product. Would definitely buy again. Year 4 and it is still like new with no rust I a salt water application.