COCADEEX 500ml Ink Refill Kit Compatible with PIXMA Ink Cartridge PG-260 CL-261 PG-240 CL-241 PG-260XL CL-261XL PG-240XL CL-241XL 260XL 261XL 240XL 241XL PG-40 CL-41

Just got my ink today (6/15) & the filling process was pretty easy. I have a Canon pixma TS6420A printer, 260xl black & 261xl color cartridge. The black cartridge took approximately around 10-12 mL of ink & the color one took approximately around 2-4 mL of each color. This isn't exact, just from what I discovered when filling my cartridges (black was completely empty & my color must not have been empty). After putting the cartridges back in, I had to mess around with my printer in order for it to clear the message. I printed out several papers & it seems to come out great. Overall my refill experience was a good one & a great way to save money on ink.

I love all of the supplies that came with it to make it easier to refill. Refilling was easy and nearly mess free. No problems with the things I've printed so far.

I was skeptical but this kit worked great. Yes it takes a little time to do the refills but saves huge money and worth it. It can be a little messy just put down some paper towels or plastic on a table and take your time. My cannon does still show a low ink code but just ignore it. When the print starts getting dimmer on docs just refill. No problem.

The media could not be loaded. I'm using this ink to refill my ink cartridge for my Canon printer but I don't like the fact that it came in the bag with the ink spelled out they put two of them two different inks in the same bag now I have to put my gloves on to clean up the mess .

I've only used the black ink but I used it to fill 7 cartridges. The ink is slightly darker than the genuine ink. The thumb screw sucks, I put it into a drill and drilled it upside down. The gloves suck too, but I prefer vinyl gloves from the store. I'd buy this kit again.

I love how easy this was to load up, its going to save us a bundle of money. Thank You

When printing with new ink the photos come out very very light no mater what setting even best setting it like looking thru a fog so disappointed

Great deal! Super easy to use!

This is an excellent value for money I have only refilled my black and color cartridge twice and I've barely made a dent into the bottles. It comes with a little screw thing to punch holes in the ink cartridge, but I found just removing the top of the cartridge more effective and you can get more ink in without having spillover. Which for me was an issue, my yellow would always turn green. It does take work to fill them up and potentially messy so if that is not for you consider a different alternative but if you're willing to be thrifty and get some stained fingers (should you not use the gloves like I do) then this is going to be a good quality ink refill kit. The syringes are handy as you can have more precision when filling up the sponge, if you're just drilling a hole you're not going to be able to see where the ink is going. That's not going to be a huge issue, you might not get as much ink in the cartridge because you can't see where it's being distributed. Overall I really good refill kit for those who have the patience and it has saved me so much money when printing.

C'était un peu plus compliqué cette première fois mais ça fonctionne et ce sera plus facile à l'avenir, les trous étant déjà percés. J'ai utilisé un outil électrique pour me faciliter le travail de perçage. Mes cartouches sont des canon et mon imprimante MX-472. L'item merveilleux est le petit rack en plastic qui vient avec des petits coussins de caoutchouc sous lesquels on peut siphonner de l'encre après le remplissage avec une seringue avec une grande force de succion. J'ai 74 ans, j'ai assez d'encre jusqu'à ma mort!!!

Très bon produit belle impression .Mais les instructions sont très mal faite, c'est pour cela le 4 étoiles. Voici mes instructions.1=Si on peut laisser la cartouche dans le boitier de l'imprimante pour faire un petit trou sur le dessus de la cartouche pour la remplir c'est mieux . l'imprimante n'aura pas a se ré-enligné de nouveau.2= Si vous sortez la cartouche de l'imprimante pour la remplir, la ça peut se compliquer. Ont perce la cartouche, sur le dessus et vous la remplissez (une shot) et vous faite un test en imprimant un texte.Si sa imprime bien OK . Si ça imprime imprime pas uniforme, attendez que l'encre se stabilise dans la cartouche et recommencer le test après 20 minutes. Si non il faut la nettoyez le dessous de la cartouche avec du WINDEX ensuite cogner la cartouche sur une table sur un essuie tout jusqu’à une ligne noir (rouge,bleu, jaune selon la cartouche que vous remplissez) apparaît en continue sur l’essuie tout. On refait le test . Recommencez si le résultat est pas très bon. Pour moi cela a très bien fonctionner.

Would definitely suggest this to anyone looking for a cheap but quality print output. It works just perfectly fine with my printer. An awesome way to save your money.

the adapter to hold the cartridge didnt fit like it was stated it would for my item number , the hand drill was useless . The gloves were ridiculous so my hands were a mess with ink.