HS-CWR1-PIN

我喜歡這個產品的防霧效果，效果非常的好，非常感謝提供如此有用的商品。

Ive used the Pinlock system on almost all my helmets for the past 10+ years. Once installed and adjusted, the system works flawlessly for me. I've ridden in torrential down pours with out the Pinlock system, and I'd constantly have to crack the face-shield to defog it.With the Pinlock system, face shield fogging is no longer an issue.A few Tips:1. The system works by creating a sealed double pained window where the insert attaches to the face-shield. Make sure that when installing the insert, you follow the installation instructions and ensure that the arrows (pointer) on the post are facing forward (as the shield sits closed on the helmet). If you encounter any fogging under the installed insert, rotate both Pinlock mounting posts a little at a time (same amount each side), until the fogging stops. Also, when making adjustments, ensure that the post pointers are oriented the same in regards to the helmet: 45 degree's up and forward, straight up, strait down, etc. This will keep each post's cam surfaces oriented the same amount and force the insert to move forward equally from both sides.2. The insert is hygroscopic (absorbs moisture), which helps it to absorb any moisture that develops between the shield and insert. It is therefore recommended to never clean the insert with water or allow it to get wet. Doing so will probably not ruin the insert, but it will shorten it's lifespan. Mine have occasionally gotten a little damp due to rain drops leaking past an unsealed face-shield, but they all have continued to work fine for quite some time.

I have this installed on my Shoei GT-AIR II Helmet and found that that the Pin Lock is made to fit just right with no margin for install error. If it's too low, the face shield wont close, if it's too high the Pin Lock is scratched on the rubber seal... I had the latter happen and now the sun will catch these scratched and it becomes distracting.

Don't waste your money on these terrible knockoffs. They don't work nearly as well as the actual Shoei pinlock inserts. Still get fog with them and they have a slight yellow tint not the clear of the actual product.In my attached pictures you can the difference in packaging and the insert itself. The real Shoei insert is the packaging on the left. The real insert also has 'Pinlock Evo' on the insert which is missing from the knockoff.Don't waste your money and support a terrible company like The Helmet Shop trying to scam people.

No es compatible con shoei x fourteen cómo está en la descripción, es falso. Que falta de información.