BDK PolyPro Car Seat Covers Full Set in Charcoal on Black – Front and Rear Split Bench for Cars, Easy to Install Cover Set, Accessories Auto Trucks Van SUV

I love these but they are baggy on my seats in my ford escape so be aware. They are so far durable and still allow my seat warmer to work. I like the way they look, I just have to tuck them in extra

First off, I did not end up using the clips. I mainly have the trunk down because I am a fur-mom x2 (no 2 legged children); except for the neighborhood kids I take to church on Wednesday and Sunday, then the seats are back up in the sitting position. Back to the clips! Seeing as I have the seats down and pups in the back (American Staffordshire Terrier and Blue nose pit) I didn't want them walking on them, so they don't hurt the paws or snag on the felt interior. Also, the last picture I put a trunk cover down and didn't want that torn. For the non-dog car rider people these clips go at the end of the elastic and it was tough for me to pull the elastic under the crevice of the seat and trunk then stretch and clip. One end is the loop the other is like a tighter L-shape and I would use pliers and close them into each other to fasten more securely. The clips work but not sure how long it will stay and not pup moving the seat from up to down position. Therefore, I secured mine with zip ties! They seem to fix it all just like electrical tape! j/k. The zip ties wont hurt the pups paws; I could give it more slack in the stretch attachments that come on the seat covers and it doesn't feel so tight that it is gonna rip them. To be honest; that was my hardest part. Getting the backseat part on and then making sure they were nice and snug around the back part. Oh, and the front seats have a velcro snap to secure under the seat. Have to go under both sides of seats and feed them through the seat adjuster then velcro it. The part about removing the headrest and cutting small holes to fit the headrest back over and also cut holes for the seatbelt snaps was easy. For the head rest cut a small pinch out about the size of a dime and that is perfect to fit it nicely. The seat belts about the size of a quarter and you can wiggle them through and if it gets too tough just cut a tad bit more and they fit nice. My front seats look a little baggy in the picture because I have arm rest on my seats. I am going to got back and do the same like the headrest. I will remove the arm rest; pull the car seat cover into place taunt and then cut a small hole and put the arm rest back on. I was just getting tired and the rain was coming. Otherwise you could just cut a vertical line long enough to slip around the arm rest bar and down to the bottom of seat but that could be a lot of material cut versus a small size dime hole like the headrest. I also purchased the product for less than the NEW price. I picked the like new for about $13 dollars and they look brand new? I don't know if it was because the box appeared opened then taped back but mine look brand new and had no cuts or tears in them. What a deal! Item arrived quickly packaged nicely with no damage. Again, budget friendly for my fixed income disability budget. Seats are protected from dog hair and a quick spill of a drink if it happens. Got them in my favorite color too! Very pleased; would order again.

Review applies ONlY to my experience with installing these seat covers on a 2024 Toyota RAV 4 Pros-price point, does not smell like chemicals, customer service responds quickly to emails, passenger seat cover fits just fine and was easy to install. Fabric is comfortable. Poured capful of water and it soaks in but it still felt dry under the cover. Cons-Driverside cover is difficult to secure under the seat, but not a deal breaker for me. Headrest covers all the same size, so it’s baggy on rear headrests and there were only 4, so I did not cover the tiny middle headrest. Seat covers are secured behind the tear seat, but that is not possible with the rear bucket seats as the fabric is sewn to the back and runs down thru the trunk. Customer service responded quickly to my 2 emails but I was advised to unhook the back cover (it’s sewn in) and then advised that their customers often just tuck the edges in instead. That did not work for me with passengers and dogs, seat cover was messed up in a day. Seems to attract more dog fur than regular seat but, if you consider that “grooming”, that would be a plus. Appearance is fine, no smell, box arrived damaged but product was intact in a plastic bag, don’t forget to note the instructions about the front airbags when installing. That’s important!

These fit for a Hyundai Kona '23 pretty well! Be careful when you put on your seats. One of the head rest covers tore slightly when placing on, but I just fixed with some needle and thread. You have to cut holes for the seat belts and the head rests in the back. They're not "perfect" but they are decent enough for universal covers and match the price point in terms of quality. I'm going to continue to use. I found them easier to put on my seats than previous universal seat covers I bought, so it didn't take long to get them in my car. For my Hyundai Kona, the head rest cover for the middle seat in the back - it is quite loose on the head rest but again, for me they work for what's intended : protecting my seats and giving my car a little personality (I got the purple covers)

Purchased these to protect the seats of my 2026 Hyundai Santa Cruz. Knowing the fit wouldn’t be perfect, I was surprised at how nice the front seat covers fit. Now this review is just for the front seats. The back bench seat has an issue since the Santa Cruz does not have folding back rests, but the bench seat inclines. It’ll take some work, but I am confident I can be successful. Can’t beat the price and the blue color surprisingly matched the blue stone color of my vehicle perfectly.

Got these as a cheap replacement for the nicer set purchased in 2014 for my 2012 Explorer The car is older and I didn't want to spend as much this go around. Quality is obviously not as great. The front seats were easy to install, and look nice enough, although the head rest covers are a touch too small. The rear folding seat install has been hot garbage and no matter how I readjust, looks awful. I've watched install videos multiple times. The little clips and straps criss crossed across the back are blah and I'm not sure why it doesn't have a full back like the front seats.

Fit and Compatibility Vehicle: 2017 Ford Focus I recently purchased the BDK PolyPro Seat Covers for my 2017 Ford Focus, and I couldn't be happier with the fit. They slide right on and look like they were custom-made for my car. The front and rear split bench seats are covered perfectly, giving my car a sleek, updated look. Installation Ease of Installation: Easy Installing these seat covers was a breeze. The instructions were clear and straightforward, making the process quick and hassle-free. It took me about 30 minutes to get everything set up, and they haven't budged since. No need to wrestle with them or constantly readjust – they stay put, which is a huge relief. Material and Comfort Material: PolyPro (Polyester blend) The PolyPro material is soft and comfortable, making every drive more enjoyable. It's breathable too, so even on longer trips, I don't find myself sticking to the seats. The fabric feels durable and high-quality, which gives me confidence that they'll last a long time. Durability and Maintenance Durability: High These covers are a fantastic shield against spills, stains, and the general wear and tear that comes with daily use. I have a dog who loves car rides, and these covers have held up great against his claws and the occasional muddy paw print. They're easy to clean – a quick wipe with a damp cloth usually does the trick, and they're machine washable for deeper cleans. Aesthetic Appeal Design: Gray on Black The gray on black design is stylish and modern. It blends seamlessly with my car's interior and gives it a refreshed look without being too flashy. I’ve gotten a few compliments from friends who’ve noticed the upgrade. Price and Value Value for Money: Excellent For the quality and convenience these seat covers offer, they’re an excellent investment. They provide a cost-effective way to protect my car’s seats while enhancing its interior look. Overall Impression The BDK PolyPro Seat Covers have been a fantastic addition to my 2017 Ford Focus. They fit like a glove, are easy to install, and offer great comfort and durability. The gray on black design adds a stylish touch that I'm really pleased with. Overall, these covers have exceeded my expectations, and I highly recommend them to anyone looking to protect and upgrade their car’s interior. Rating: 5/5 These seat covers have truly transformed my car’s interior, making it feel fresh and stylish while offering practical protection.

I think “good enough” is the right praise. These fit a little loose around the sides but not a major distraction. Several straps tore off while tightening the rear seat covers and the fabric itself seemed like it would barely survive being pulled through the seat seams. However, the installation was fairly quick (especially the front seats) and I think it would be hard to find something that looks quite this nice at this price point. Hoping it will live up the two puppies and two kids trying to destroy them on a daily basis. I did get the suggested console cover and steering wheel cover and the red is a nice pop through my Chevy Bolt EUV.