Bon Tool 82-289 Leveling Pins (50/Pkg)

Showed up in a timely manner. They were definitely bent a little but they worked perfectly with a little bend back to straighten them. Ordered a second time worked just as well as first

These babies were great. We leveled a 120 sq ft area from A feather edge to 7/8” at the deepest. There were areas that dropped 1/4” within 9”.We used a 12’ MDF Baseboard, shims, & a level to lay it all out and then stuck these to the concrete.Mixed up the Mapei self leveler and went to work.These helped us move around the material to the right spots and know we had things where it needed to be.Would highly reccomend!Also - re: packaging - they were BARELY bent - so for our (under 1” overall height) needs they worked flawlessly.

Items just as described. Great quality. Easy to use. Recommend and would buy again.

They did what I purchased them for, which was to help level a 450 sq ft basement floor with self levelling cement. They are flimsy plastic and I wouldn’t trust the maintain vertical above 20 - 30 mm in height. Max height I left was 34 mm so served the purpose. I wouldn’t have done this job without them though.

Didn't even open the bag. These are way too soft and bent in packaging. wouldn't trust them at all even if they stuck. Just ended up using 1-1/4" tapcon screws drilled into concrete. Screws are much easier to dial in height, cheaper, and not moving with slurry/bumps from spiked roller. Don't waste your time.