DEEPCOOL DP-ATX-MATREXX55-AR-WH Matrexx 55 ADD-RGB ATX Full-Size Tempered Glass Motherboard Mid-Tower Case (White)

Not worth it. Made with very cheap metal. HDD doesn’t fit in the cage. You can’t plug in the SSD if you are using the mounts. Taking off the front panel is near impossible. Does not come with fans. Manual is almost misleading because all the screws come in one bag. You can only put a 120mm in the back with my motherboard. You can’t put all the screws for the fans and HDD. I do not recommend this case.

I bought this case as it was a project to build my daughters first PC so I didn't want to go overboard on the price but also wanted to try to get the best value for money I could get. I opted out of a few other budget pc cases due to either issue with cable management/air getting into the case or other reasons. After looking around for what felt like a few weeks I finally settled on getting this case after it first showed up on Amazon.When it came on amazon I got the fanless version, as we already had plans to go for a corsair LL build so having it fanless was preferential to me so that was not an issue.Pros:Lots of build space at the component side of case and my 7 years old was able to place things into this with relative easeShroud to cover up PSU (I would've liked this to be a full cover so I didn't have to spend extra on a white PSU which is pretty limited to corsair RM currently). The only reason this would be nice is if you have a fancier PSU to show the wattage being used like the newer nzxt.Good Airflow, aside from the holes at the front/sides for air to come into the fans there is also an opening at the bottom of the front panel for extra to come in and this will help airflow.As long as you have no need for the 3.5/2.5 drive bay cage at the bottom you could easily mount a 360 or 240mm rad to the front of the case (it's worth noting, it is a rivet though so you will need to drill it or find a rivet remover tool to achieve this - a fairly simple 1 min task with any drill though) and there is space for a 240mm rad at the top of the case with what I found to be good airflow. This was a very tight fit against the heatsinks of the motherboard though so be sure to check your clearance before purchase, this was using a corsair h100i platinum SE and it was all but nearly hitting the heatsinks of an MSI b450 carbon pro motherboard, any thicker rad and you could have issues.Plenty of space even for a large GPU (pictured I am using an MSI 1070 armor GPU for my daughter's build and you can see there is still tons of space left)Cable management was relatively easy, there could have been more little bits to put cable ties through but in honesty for the price, I was satisfied and still managed to find my way around it. With less RGB this would be more than amplecons:There should have been a small bit of extra clearance between the top of the board and space before the top of case, it would allow for much better rad optionsAs mentioned above - the shroud could've been a full cover, most people buying a "white" case have a theme and you then force their hand to seek out a white PSU and those choices are quite limited.Allow easier removal of drive cage. I wanted a white PSU to match the case, and options are limited and thus the clearance space for any PSU is bigger these days. I could not fit in a corsair RM750 (2019) with the cables put in because the drive cage was blocking it, I will say that this was on me for not reading the product description and seeing the max length of 170mm, but felt this should have stood out more.A very small note - on the glass panel side, I have no idea why you have CNC out the metal to have space for a metal side panel to go in, the tempered glass is screwed in using screws and it made no sense to do this. Instead of covering it up using a 3M sticky pad, which in theory should work, but if you look at the pic of mine, you will see at the top above the tempered glass there are 4 holes - the pads here are a bit sticky and come off easy if you turn the case over with the glass removed.. it stuck to the floor and came off.A load of random RGB cables for front fans are included even if you don't get fans included, instructions are useless on that front. Luckily I've been building pc's for 20 years and after 5 mins or so of looking figured this out, but instructions should make it far clearer that unless you have fans you can just put those cables in a drawer out the way.TL;DROverall - its a solid case, I would wholeheartedly recommend it apart from a few minor changes listed above that irked me and if looked at a v2 version of the case could be fantastic.Visually I believe it looks great, and there was enough space for cable management at the other side.I did have it at 5 out of 5 stars, but given that the few cons above, I knocked 1 off.

Partiamo col dire che é un case cheap...abbastanza economico ma la striscia led verticale fa recuperare tanti punti, esteticamente più bello dello sharkoon tg4/5 e similari. A livello costruttivo a parte il pannello frontale fatto bene in vetro temperato il resto del case é fatto in lamierino abbastanza sottile che si piega solo a guardarlo, mancano le rifiniture, ne ero consapevole, ho sacrificato la qualità per il design

super content est puis je la trouve stylé

COOLER MASTERのケースを使っていましたが裏配線がし辛くCPU電源のピンが裏から通せないくらいだったのですが、このケースは裏配線に余裕がありサイドパネルも無理なく閉じられました。(二番の感動ポイント)まあ、良いところをあげても仕方ないのでここはちょっとなぁっていういまいちポイントを思い付く限り挙げておきます。電源のスペースが狭くてフルプラグイン電源だと使うものを先に差してから付けた方がいいと思います。手前のCPU電源や24ピン電源用でも厳しい(おそらく無理)のでPCIeやSATA、Peripheral電源の後付けはできないです。M/B取り付け用のスペーサをドライバで回すためのキャップが入っていなかったです。ペンチで回せばいいだけなのですが不用意に傷付けたくないのでつけてほしいですね。私は持っていたので関係なかったですが。PCIeスロットのカバーは一番上しか付いておらずそれ以外は金属疲労で折るもので付いてた一枚もふにゃふにゃなので、先にカバーを買っておいて全部付け替えるといいと思います。Amazonだと白いカバーが無いんですよね…見た目が良いものを白く塗装しようと思っています。2.5inch SSDのブラケットの穴が大きすぎて付属のネジだと取り付けられないです。今回はM.2 SSDがあるので取り付けを諦めました。前面に見えるように取り付けるところがありますが、SATA電源や通信ケーブルで見た目がよくないのと、配線を通す穴がいまいち取り付け位置と合わなかったです。フロントのUSBやオーディオ端子ですがかなり固いです。まあ、力を入れれば抜けますがRESETボタンが隣にあるのでしばしば誤って押してしまいます。個人的に一番のいまいちポイントですが、フロントとサイドのガラスに保護用のフィルムが貼ってありませんでした。目立つ傷はありませんでしたが、作業中の精神衛生的によくないのであった方がよかったですね。こんなところです。音とかはマザボ等の設定次第だと思うので特にないです。ケース自体はそんなに重くないと思います。そんなに他のケースを持ったことないので確かなことは言えないですがCOOLER MASTERのケースよりは全然軽いです。完成してしまえばLEDが綺麗で非常に見た目が良いので満足度は高いです。(一番の感動ポイント)参考程度に写真を載っけておきます。裏配線は汚いですが・。・追記純正の空冷だと冷却が厳しかったので240mmの簡易水冷に付け替えたので、ちゃんと付いたよ報告。VRMのヒートシンクやコネクタ類がありますが手前に寄せて取り付けたら問題ありませんでした。

the rgb strip on the front is blue cannot change it other then that lovely case