Hasta 70% de descuento + 100% de reembolso

Descargar la aplicación

Fuidamos elementos de

EAU
UK
India
EE.UU
Japón
KOREA

Servicios al cliente

Sobre nosotros

Soporte al cliente

Desert Online General Trading LLC

Dubai, United Arab Emirates

Seismic Audio Speakers 3 Foot XLR Dual Male Patch Cable, 2 XLR To 2 RCA Audio Cords

Seismic Audio Speakers 3 Foot XLR Dual Male Patch Cable, 2 XLR To 2 RCA Audio Cords

Q: Is there a balanced version of this cord?

Hi, Technically, no, there is no balanced version of this dual RCA to dual XLR cable. This is because RCA connections are always unbalanced, as the connectors have a Tip position (signal +) and the Sleeve position (ground). For a cable or signal to be balanced, it has to have an additional position/wire, to transmit the lower voltage, out of phase version of the original signal +. This out of phase version (signal -), is brought back into phase when the signal terminates at the receiving device, and any noise or interference picked up along the cable, gets rejected/cancelled out. This is why balanced cables can be run much longer distances than unbalanced cable types. In these SAXFRM dual RCA to dual XLR cables, the Tip (signal +) conductor of the RCA sides are connected to the XLR Pin 2 positions on the XLR sides. The Sleeve (ground) RCA conductors are connected to the XLR Pin 1 positions, and the XLR Pins 1 and 3 are connected together, grounding out the XLR Pin 3. Since you are using the version of this cable that is Male XLR, I presume you are outputting with the RCA plugs and using the XLR Male sides to connect into 2 channels of a mixer, or to the inputs of a power amplifier, or to your Left and Right powered loudspeakers? The only way to balance these unbalanced RCA outputs would be to input these signals into some DI (direct) boxes, which will balanced these signals, while usually converting to XLR. You will find most DI boxes will have an unbalanced 1/4" TS input, as DI boxes are commonly used with electric guitars and basses. If you go the route of a DI box, you would likely need some RCA to 1/4" TS cables, which we offer. Please let us know if you have any questions. Thanks, Rusty

Q: Late these compatible with KRKs?

Hi, These SAXFRM dual RCA male to dual XLR male cables would allow you to connect a few different devices in a few different ways. For instance, if you are outputting from a device with RCA female red and white outputs, then you could connect the RCA male side of this cable to that device, then connect the XLR male side to the XLR female inputs of a mixer console, or the XLR female inputs on some powered speakers or monitors. I am hesitant to answer your question directly, because I do not know exactly which model or KRK monitors you have. You can email us directly at customerservice@seismicaudiospeakers.com and let us know the model of KRKs you have, and the make and model of the device on the other side of the cable, and we can let you know if this SAXFRM-2x3 cable will work. I request you email us directly because once we submit our reply to this Amazon Answers question, we can not reply back or comment, for further discussion. Thanks, Rusty

Q: Is this compatible to the shure blx288?

Hello, thank you for your interest in the SAXFRM-2x3. We apologize, but the short answer is no. If you are trying to connect the receiver to a mixer or other input device that takes RCA, I don't think so. I'm showing that the BLX-288 receiver only has one XLR output, not two, and I'm also showing that it has (as would be normal) a male output. This means you need the XLR side of the cable to be Female. You should also look into getting a single cable, though if you have multiple receivers then a SAXMRM-2x3 would work for that (to clarify that is a different cable than the one you are inquiring about). If you are not connecting the BLX288 to an RCA device, google my number and let's talk. I can help you figure out how to connect them together. Have a great day!! -Mike

Q: Does going from balanced to unbalance half the voltage of the signal?

No, the signal present on the line does not change, it is only an isolated ground. Unbalanced Audio An audio cable carrying an unbalanced signal uses two wires: a signal and a ground. The signal wire, as the name suggests, carries the audio signal to where it needs to go. The ground wire acts as a reference point for the signal. However, the ground wire itself also acts like an antenna, picking up unwanted noise along the way. Because unbalanced cables can pick up noise as a signal is sent along the cable, they’re best used for short distances, like connecting a guitar to a nearby amp. Doing so will minimize the risk for unwanted noise. Balanced Audio The structure of a balanced audio cable is similar to an unbalanced cable – with one addition. A balanced audio cable has a ground wire, but it also carries two copies of the same incoming audio signal, sometimes referred to as a “hot” (positive) and “cold” (negative) signal. What’s the difference between the hot and cold signal? The two signals are reversed in polarity, so as they travel down the cable, they cancel each other out (think of how adding positive and negative numbers of equal value amounts to zero). Once the hot and cold signal get to the other end of the cable, however, the polarity of the cold signal is flipped, so that both signals are “in phase”, and perfectly in sync. Here’s the cool part: if the cable picks up noise along the way, the noise added to both of those cables is not reversed in polarity. So when the cold signal flips in polarity to match the polarity of the hot signal, the noise carried along the cold signal cancels out with noise in the hot signal. This "canceling out" process is called "common-mode rejection," with the noise being the "common" signal between the two. Because balanced signals send two “in-phase” signals, they’re also louder (roughly 6 to 10db) than what unbalanced signals can provide.

ID del producto: 24448455

Transacción segura

Detalles

Brand
Seismic Audio
Connector Type
RCA XLR
Cable Type
Composite
Compatible Devices
speaker
Special Feature
Heavy Duty are

🔊Heavy-duty strain relief

🔌3ft length

🎛️Dual XLR to RCA

Comprados juntos con frecuencia

Seismic Audio Speakers 3 Foot XLR Dual Male Patch Cable, 2 XLR To 2 RCA Audio Cords

Cable Matters 2-Pack Premium Short XLR to XLR Cables - 3ft, Male to Female Microphone Cable, Oxygen-Free Copper (OFC) Mic Cord, Black

Behringer Ultragraph Pro FBQ1502HD 15-Band Stereo Graphic EQ with FBQ Feedback Detection

Descripción

🎶 Elevate Your Sound Game!

DURABLE DESIGN - Built with heavy-duty strain relief and a flexible rubber jacket for long-lasting use.
PERFECT LENGTH - At 3 feet, this cable is ideal for both studio and live settings.
SEAMLESS CONNECTIVITY - Effortlessly connect your audio devices with this versatile 2-XLR to 2-RCA cable.
NOISE FREE PERFORMANCE - Enjoy crystal-clear sound with a design that minimizes unwanted noise.
COLOR CODED CONVENIENCE - Easily identify connections with the red and black color coding.

The Seismic Audio 3 Foot XLR Dual Male Patch Cable is designed for seamless audio connections, featuring dual XLR to RCA connectors, heavy-duty strain relief, and a flexible rubber jacket. Perfect for connecting microphones, mixing consoles, and amplifiers, this cable ensures noise-free performance in any audio application.

¿Tienes una pregunta? Mira lo que otros preguntaron

Is there a balanced version of this cord?

Late these compatible with KRKs?

Is this compatible to the shure blx288?

Does going from balanced to unbalance half the voltage of the signal?

Preguntas comunes

¿Son los productos genuinos y auténticos?+

Sí, todos los productos se obtienen directamente de minoristas autorizados en los Estados Unidos, Reino Unido, EAU e India. Mantenemos procesos de control de calidad estrictos y verificamos cada producto antes del envío. Todos los artículos vienen con garantías de fabricantes aplicables y están cubiertos por nuestra política de devolución estándar.

¿Cuánto tiempo lleva la entrega y es confiable?+

Los tiempos de entrega varían según el país de destino, que generalmente van desde 3 a 9 días hábiles. Cada pedido es totalmente rastreable a través de nuestro sistema. Manejamos todas las autorizaciones aduaneras y utilizamos socios de mensajería confiables para la entrega de última milla. Recibirá actualizaciones periódicas sobre el estado de su pedido por correo electrónico y nuestra aplicación.

¿Qué es DesertCart? ¿Es seguro ordenar?+

DesertCart es una plataforma internacional de comercio electrónico que funciona desde 2014. Procesamos de forma segura miles de pedidos a nivel mundial cada día. Cada producto pasa por nuestro proceso de verificación de calidad antes de la entrega, y proporcionamos un seguimiento de pedidos de extremo a extremo, atención al cliente 24/7 y una política integral de devoluciones para garantizar una experiencia de compra segura.

¿Cómo se calcula el precio del producto?+

Nuestros precios incluyen el costo del producto, el envío internacional, los aranceles de importación, la autorización aduanera y los cargos de entrega locales. Manejamos todas las aduanas e importantes, asegurando que no haya tarifas ocultas al entregar. Los miembros profesionales reciben beneficios adicionales, incluido el envío gratuito.

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a millones de compradores en más de 100 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart