Polyamide Clip-On Kydex Flashlight Holster for Fenix PD35, Olight Baton Pro Warrior Mini, PowerTac M5 E9R, Nitecore P12, ThruNite TN12

I use a Nebo Y2K flashlight and was using but not liking a nylon webbing style holster. One of my coworkers carries a Streamlight in this holster so i was able to test fit prior to ordering. The kydex is well made and sturdy. The bottom of the holster is mostly open to allow debris to escape while keeping the flashlight from dropping to far down. There is no snap or strap for retention just a nice fiction fit making it simple to use. Don't worry about the clip coming off your belt, it won't. The clip design was probably the only aspect i was not thrilled with. Oh, the holster didn't come loose causing the loss of my flashlight because you need 2 hands to remove the clip from your belt. This clip will hook onto a pocket or a piece of sheetmetal or just about anything else up to 3/16" thick and if there is a hem on the material its not falling off. I modified my to make removal possible but i use a double thickness leather belt.

While this flashlight holster was not designed to carry the Imalent LD70, it can and does. Initially, the flashlight is pretty tight in the holder, but after 3 minutes with a heat gun on low warming up the plastic, the Imalent LD70 fits like a glove, like the holder was made for it. Just enough tension to keep it snug without any chance of it falling out, but easy enough to slide it out. The charger even fits perfectly in place on the flashlight while in the holder. The holder is made of thick semi-rigid sturdy plastic. It looks and feels of good quality. I'm assuming I'm not the only person who is looking for a good way to carry the Imalent LD70, this is it...finally.

Overview: I work in law enforcement and I got this for the Fenix UC35. I use it daily and as a EDC and for work. The Fenix UC35 fits great. It does slide in upside-down. I have been using this product for a few months now. I wanted a longer period of time to provide a solid review. FENIX UC35 USB Rechargeable 960 Lumen Cree XM-L2 U2 multi battery type compatible LED Flashlight with, 3200mAh rechargeable battery, USB charging cable and 2 X EdisonBright lithium CR123A back-up batteries bundle EDC use: I use this as my EDC. I like the clip and how it can go on just about any belt thickness. The great part about it is it can also clip directly on your pants which is big for EDC because I dont always wear a belt. I carry the light instead of a firearm. You cant carry firearms everywhere. The holster allows for quick deployment and secures just as easily. I can get to strobe pretty quickly. Issues: There have been complaints about not being able to swivel. That would just add to the cost and create a failure point. As it is, it is a very durable device and performs flawlessly. Another issues people complain about is that the light sits upside-down. I would have liked a downward facing option, but that is a design based on the lights. Most lights are stored facing up due to their design. Because it faces up this device solves the UC35's issues of not being able to tailstand. It even tailstands better because the base is much wider with the holster and it is flat. Conclusion: I am extremely satisfied with this item. It works great and is extremely simple. I definitely suggest it.

Purchased to fit a Fenix PD35 TAC (1" diam.) carried on a duty belt. I was a little worried when first received. The fit was really super tight, could hardly get flashlight in the holder, and when I did, could hardly remove it. I like a secure hold, with no worries about flashlight falling out, but this was way beyond that. As with all kydex holster materal, I knew a little heat would solve the break in problem. I inserted the handle of a screwdriver, slightly larger in size, and set it next to our wood stove for a hour. Fits my Fenix like a glove now, perfect. I would of given it 5 stars if it wasn't for the extra work to stretch it out a bit, but again this is a generic fit holster made to fit many brands. Very good overall quality. A nice bonus with this holster is you can stand the light up on it's tail cap now.

My pd35 fits in here perfectly. I'm surprised they still sell these, my last one broke after 8 years of every day use. I bang it up all day on things, working on the ground, on concrete, all over. So this thing is getting tore up daily. The 3 tabs on the bottom that keep the flashlight from falling through the holster, 2 out of 3 broke recently so I figured it was time to get a new one before the last tab broke and I lost the light. 8 years is a good lifespan I'd say

Does not fit a 1in Diameter Flashlight and the retention is held purely by friction, meaning its extremely hard to get the flashlight out. As someone who was planning to put this on a duty belt, its a liability it should not require two hands to withdraw it. It's made of a harder material but it also means its harder to adjust for fit.

I am super impressed at what a good holster this is. It works perfectly for my Olight M2R Pro Warrior tactical flashlight. It is very slim and compact on the belt. It is a little bit tight to remove and to insert the flashlight, but the flashlight is held very securely and does not shake loose. There are 3 tabs at the bottom edge of the holster to keep the flashlight from pushing through or falling out the open bottom. One-handed re-holstering is easily done with some resistance as you insert the flashlight into the holster. I line up the pocket clip of the flashlight with the opening in the holster. It does, as said before, hold very securely. There is a hook at the bottom of the belt clip that allows(with some practice) to hook the holster onto a belt or remove it without undoing and taking your belt off. I am very satisfied with this holster, it has excellent craftsmanship and excellent quality of the holster material. I am glad that I purchased it.

My job requires me to have a flash light on my waist all the time, as it is one of my essential tools. My Fenix PD35 flash light fits snug in the case, and the flashlight never accidentally slid out of the holster yet. The holster is aesthetically pleasing compared to other third party holsters on the market or even the stock holster made from the flashlight manufacturer, Fenix. My only complaint with this product is the fact that I can only put the flashlight in the holster with the tail part facing button. Also, if you have the pocket clip attached to the flashlight, the holster will accept the flashlight in one specific orientation only. Overall, this is definitely a good product made with quality material and I would recommend this product for people who are looking for a premium holster that will last a long time.

Awesome product. Holds the FENIX PD35 perfectly! Sturdy and great material.

I have used many flashlight holsters from my security days and now working as a Correctional Officer. Holds my fenix PD35R perfectly, but it did not fit the pro version so I am now stuck with one light that does not work with it. besides that it works as expected and I do receive alot of complements as to how secure and tactical it looks and works. The belt loop is not fixed but it does do a good job staying on a duty belt. It has held up in many action packed violent situations as expected.

this is a very good holster the only thing is sometimes when sitting i find it a bit uncomfortable because the top of the holster kind of rubs my side so i have to turn it as far to being side to side then up and down but otherwise very handy

Nice and snug on my duty belt, fits the Fenix PD36R perfectly.