Pre-Assembled Misting Kit, 75FT Misting Line + 27 Brass Mist Nozzles + Brass Adapter(3/4") Outdoor Mister for Patio, Garden, Greenhouse, Trampoline, Sprinkler

Works as advertised. You need to assemble the whole system. If you are not handy, it may be a challenge, but it was super easy for me. I've got mild carpentry, plumbing, and electrical experience, so it was straight forward to me without the instructions. Instructions are in very poor, broken English. They skimped on paying a translator. But I didnt need them so didn't care much. I've got this hooked up a 2 stage, whole house water filtration system that I have connected to my hose spigot for my garden. We do not have a hard water issue in my area, so between the softer water and water filter, I do not anticipate it clogging any time soon. It comes with a T splitter I'd need be. I did not need it. One of the emitters was missing one of the pieces that holds the water line in, so I took one out of the T splitter and made it work. I was a bit irritated at this but they also send an extra emitter nozzle which I ended up needing because I messed up putting the Teflon tape on the nozzle and it got inside the nozzle and clogged it and I cannot get it out. So because they made my life easier by sending that extra nozzle, I wasn't upset about the missing piece that holds the hose in the emitter. After the fact I realized they send 16 emitters and 17 nozzles, while the listed stayed 15, so I'm stoked with them sending extra in case you have issues Definitely use the Teflon tape on the nozzles or risk them leaking. If you have the nozzle head facing down and the threaded side up, you wrap the Teflon tape clockwise. Going the other way can result in "unwinding" the tape as you screw it in. Overall I'm satisfied with the product on day one. I'll update if things change but only issue I see is the nozzles getting clogged which is of no fault to the company. That's a water supply issue and any misting nozzle will need maintenance at some point or another. It also included a sediment filter where you hook it up to a spigot/hose. Won't be enough to stop hardwayer build up but will stop bigger particulate. Overall I'm satisfied with this product and my chickens are finally not panting any more

I live in the PNW, too darn hot these days for some of my chubby, English ladies. The chickens seem to like the mist and the chicken run seems noticeably cooler. Quick shipping, easy to install. PROS Easy to install with a good pair of scissors and some zip ties. I added 8 misters using zip ties to the top edge of my chicken run in less than ten minutes. - Determine the layout and lengths before you cut. Avoid hard turns and bends. - Mark the desired mister locations with some masking tape. I used zip ties on each side of intended mister location - Make sure you leave enough at the end to attach a hose without pulling it too much. - I hung the entire black hose run before cutting. BUT, wait until the end to fully tighten your zip ties. - Cap the starting end with the supplied cap - Move to your next taped location. cut the tubing, install the sprayer tee and screw in the brass misting valve. - Then move to the next taped mark, then repeat the whole process. CONS If I had any complaints at all: - The hose end doesn't rotate making it a little tricky to attach. Solved this using a set of quick-connects. - The hose end washer is a little cheap and lacks the tiny tabs to keep it in place. Final Thoughts: I really recommend using a good brass hose splitter with a ball valve so you can independently adjust the flow to this connection. I used it on my chicken run, but it would probably work equally well for a patio. For a patio, make sure it's mounted pretty high or it will get a lot of things and people wet. If you mount it too low, the mist will not evaporate before it hits the surfaces and everything and everyone will eventually be very wet.

This misting system does a decent job at providing relief on hot days, especially for outdoor spaces like patios or greenhouses. The pre-assembled design made it fairly simple to set up, and the mist output is effective at cooling the area. It’s great for keeping plants hydrated or adding some fun to a trampoline during summer.However, I did notice some minor issues. The misting nozzles tend to leak slightly which can create small puddles. Additionally, the mist line feels a bit flimsy, so I’m not sure how well it will hold up over time with frequent use,That said, the brass adapter and nozzles are nice touches, and it gets the job done. If you’re looking for an affordable misting system for occasional use, this works well enough, but I’d suggest spending a little more for something sturdier if you need long-term durability. If you’re on a budget and just need a quick cooling solution, this can work. However, I’d recommend looking into a more durable option if you want something truly hassle-free for daily use.

Amazing! Easy to assemble. Works Great as a patio fan and cools with mist for a large area. Sitting too close could make you damp (great power). We live in 100+ heat in the San Joaquin Valley and the mist actually makes it a good distance to cool people. Same size a regular standing fan

The past few weeks have been absolutely brutal in the Midwest. I have been spending a lot of time out on my hot deck as construction is happening in the house. The day this arrived I immediately set it up. Very easy. I did have to use quite a bit of plumbers tape to stop any leaks at the connection site, but it was no big deal. The mist instantly felt like air-conditioning. My clothes did get quite damp, however, this was so much better than simply sitting outside and boiling. If you’re trying to decide whether to get it, I encourage you to do so!

This product is close to garbage. I gave it 3 stars because it had held up for about a month, but that may change. I had 3 issues with this so far. 1. The threading inside of the nozzle T's are very coarse and do not properly seal with the brass nozzles. I had to use nylon tape to properly seal the nozzles or else I would get random streams of water squirting from the threading. And BTW, use a different tape than the tape supplied. The supplied tape is so thin and stringy that it would take 3it's the wraps compared to tape I had bought from a local hardware store. 2. The provided clips that resemble badge holders were almost all defective and broke where the plastic attaches to the "metal" material. Looks like the QC was poor, in my opinion, and many of the plastic pieces tore off with very little effort. I was able to salvage a few to still use. 3. The clasps that hold the 1/4" tubing on the nozzle T adaptors need to be completely pushed in, even further than just inserting to what seems to be fully inserted. I ended up needing to depress the release flanges on both sides and push the tubing in with some force, then pulling the flanges out and pushing again. I have worked with these types of adaptors before, and most just need to be pushed in until they stop, without pulling the release flanges out. These have grip, but do not seal properly unless the flanges are pulled out, with the tubing installed. I gave 3 stars because, even though there are Quality Control issues, the product DOES work. To get a proper misting effect for a covered patio, it is best to have the nozzles/sprayers at least 4' from where you are sitting. 6' is the recommended by the manufacturer. If the threading was a bit tighter in tolerance, the tape would not be needed. And if the plastic card-clips were a bit more sturdy, they would hold up better. This is all just from my experience.

Works great! Part of ‘phase one’ of getting the patio usable when it’s 100°+ degrees outside and the wife has spent hundreds on plants that need to be watered daily. After the connections are made turn the hose on high, let the air bubbles escape and then immediately turn the hose to the lowest setting and it’ll run forever and provide a nice light mist on everything. A regular cheap fan was used and the base substituted with a heavy umbrella base (so the fan wouldn’t tip if a gust of wind came). The base was then spray painted to match the fan. The little nozzles on the kit work great. Very happy with the purchase and how well they work!

My porch is hot in summer. I have a heavyduty fan and ordered this mister to attach. It is easy to install and works perfectly. I can now BBQ on the porch again due to the cooling affect of this nister