OMOTON [3 Pack] Screen Protector for Samsung Galaxy S20 FE 5G 6.5inch, Tempered Glass / 9H Hardness/Anti Scratch

I have been using Omoton or thereabouts since I discovered the brand in 2016> I bought an Omoton tempered glass screen protector for the Note 5 and Moto G4. And now, for my new S20 FE 5g.First thing: This particular TGSP does not have a cutout for the front camera. No issues as there's no flash module.Installation was fairly simple. The package includes one microfiber cloth, multiple dust removal strips (they are basically stickers that can be used to pick up dust from the phone screen), "hinge" stickers (which you use to latch on the TGSP on the new device before you peel off the adhesive backing, a cardboard "squeegee" thing to push out air bubbles, and instructions.It took me about ten minutes (probably slightly less) to install the TGSP on my phone. I installed it in the bathroom where I turned on an air filter and the shower (to get hot steam in the air) so that there would be minimal to no dust particles floating around.I set up my fingerprints on the phone after attaching the TGSP. No issues and the phone unlocks with my thumbs easily. This is good because the FE 5g does not have an ultrasonic fingerprint reader but just an optical one. And yet, still the Omoton TGSP is clear enough for the optical fingerprint reader to work perfectly.This TGSP does not cover the edges of the screen. But that's because this is "case friendly!" That means that your case won't push up on the edges of the screen protector and cause it to lift. No issues here!I am very pleased with this screen protector and brand. There's just so many different brands out there that it's hard to pick a good one but this one is great!Update: I have now several additional days of usage. I was most concerned about lifting from the edges, but so far, no issues here as there is sufficient space between the screen protector and the case.Update 2: I am noticing about 95% accuracy with the fingerprint reader. I think I may have to redo my right side fingerprints because that's the only one that ever has any issues. Left side works perfectly each time.

Relatively easy to install. Works fine with my Spigen case. Adhesion seems good and achieved no bubbles on the 2nd try.The "bubble removal press tool" that they included is a joke sadly. It just bends and tears after a few swipes and then that's as good as garbage. Better off using a credit card or something stiffer to press the bubbles to the edges.Misleading product info. No mention of not being able to use the fingerprint reader with this installed, but I instantly started having issues. The phone just doesn't seem to properly read fingerprints anymore with the protector installed. It works fine if the screen is OFF and doing initial read with "always on display", but once the screen is on, it doesn't detect the finger at all. This is also problematic because it literally prevents me from adding any additional fingerprints to the onboard memory.******UPDATE** Samsung has since put a patch out that has fixed the fingerprint issue for me. If you go into settings there is a section under the display options to allow for higher "touch sensitivity" - with a specific mention of use with screen protectors. It seems turning this on resolves any fingerprint issues for me.****Three screen protectors included is almost a must - if this is your first time installing one of these, you're bound to botch the first try.A little annoyed that they didn't include a guide for the phone to just drop in the screen, they included these strips instead that you use to drop the protector down in a "door hinge" fashion which is certainly prone to error and mis-alignment.Overall... I guess it's fine considering the price. I just won't be using these again due to the fingerprint scanning issue.

Se as above

This screen protector is better than others I've tried. It took a little fidgiting to get all the bubbles out but I have 3 cats soooo I'm not blaming that on the screen protector.The screen protector doesn't have any cut outs to have to center and it sits a little inside the screen so it doesn't lift with a screen protector. I've tried it with 3 different styles of screen protector and they all worked without lifting. I tried a 2 piece that fits tight (I have to use a butter knife to get it off and this case has made other screen protectors lift), a Spigen 1-piece and a wallet case. All worked well.After installing the screen protector I deleted my fingerprints and turned on Increased Sensitivity then added my fingerprints again. I've tried all 3 fingers and they work on the first try.The adhesion seems pretty good. Like I said it didn't lift but I was able to peel a corner up to get a stray cat hair that snuck in. With the dust stickers and microfiber cloth I was able to get all the bubbles out.And......I need to say this is the slickest glass I've ever used. It's not tacky or drags. It's very slick and smooth. It feels much better than others or that lousy factory installed screen protector.I would order Omoton again.

Took me three tries before I was happy with the results. First try I had a air bubble in the bottom middle of the screen that wouldn't come out. Second try the edge of the protector on the top right would not stick and would keep lifting up causing the corner of the protector to show air around the edge. Third time had a similar problem as the second try but after squeegeeing for several minutes and pressing down hard the corner finally stayed down. Also it would be nice if the protector screen was slightly wider so that it was flush with the phone and not noticeable.

Very easy to install. Comes in a very solid box which was handy. Previously I have bought screen protectors which arrived broken. But sold hard box. Comes with a guide so easy to install and only hade to press down with card on one corner. Sealed itself on phone. Perfect fit

Works well, saved my screen in the first few days! Fingerprint reader etc works perfectly, but note as it's tempered glass it is noticeably thick on the phone, especially with the slightly curved edge of the phone

The best screen protection that I have bought over the years of owning a mobile phone.Follow the instructions precisely and the screen is easy to fit. The location frame is a clever touch when placing the protector screen on the phone face.Once fitted you would not know it is there.Highly recommend.

Fits well and easy application. 3 in the pack gives extra security for if you crack one.

I've used this brand before, and it is great value as you get 3 protectors. It goes on very smoothly and comes with an entire kit, which is helpful.I did find it a little odd that this set does not have a front camera cut out, which means you have the protector going over the camera (never seen that before) but for now it doesnt seem to be causing any issues with the camera image quality. But other than that, it's a solid screen protector.