HumanCentric VESA Mount Adapter Bracket for Acer Monitors, Fits Models G226HQL, G246HYL, G247HL, G277HU, S200HQL, S200HL, S220HQL, S230HL, S232HL, S240HL, S242HL

I've got an S200HQL as a little secondary monitor, and this mount works well for it. It's mostly stable, it will swivel a little bit, and the stabilizer bar does help it not wobble around as much. Due to the odd back shape of the monitor, it doesn't sit flush, but there's plenty of room to move the bar around and get a pretty stable push on it.Now for the reason I removed 2 stars... mine did NOT come with the included spacers that it was supposed to. Mounting the S200HQL is not possible (well, at least not safely) without the spacers. The screw went in very loosely and may not have held it at all. Luckily, I was able to find a couple of washers that worked well enough. If I didn't have any, I would have had to have waited for the seller/manufacturer to [hopefully] send me some, or I would have had to go purchase some.This would have been a 5-star review (4-star if I didn't get the parts, but did not need them) had the spacers been included that were supposed to be. Bravo to the manufacturer for making an adapter to make a monitor do something it was not originally designed to do. It saved me from having to buy a different secondary monitor.EDIT 4/3/18: I decided to restore this to a 5-star review due to the stellar customer service I received and compensation for the missing spacers. I have no doubt they would have quickly taken care of me should I have needed the spacers sent to me. But a word of advice, make sure you have the spacers you'll need before you start mounting everything. :)

I was hesitant at first due to the price of these adapters, but they are worth every single penny. No regrets what so ever. I purchased three of the V4 models; one in a one back the other in a two pack. The packing job was pretty funny, they individually boxed in a 'L' shaped boxes. The two pack came with two 'L' shaped boxes stacked into each other like Tetris blocks to make a rectangle and then placed inside of another tight fitting rectangular box.As far as quality goes, these things look top notch. I don't think I'm gonna have to worry about the paint coming off, they are very evenly coated, and their logo is painted in a nice contrasting bronze. It appears to be made up of one entire sheet of thick metal folded and then welded at two points. I don't thing it'll be bending anytime soon.The V4 has threaded holes so you don't need any washers and nuts, but they still did a very nice gesture and included 4 screws in case you are missing any of the screws that came with your VESA mount. They even include 5 washers that they claim are for using as spacers for certain monitor bolts. I didn't end up needed them for that, so I used them to add even more stability to the mounting holes.These adapters are a perfect match for the hardware that I am using, which I will link below. They are an extremely sturdy combination. Right now if I slam on my desk and even shake it, the monitors will not shake.I was hesitant at first due to the price of these adapters, but they are worth every single penny. No regrets what so ever.Monitor: Acer H236HL bid 23-Inch Widescreen LCD MonitorMount: Mount-It! MI-753 Triple Screen LCD Computer Monitor Desk Mount Stand Arm for 19, 20, 22, 23, 24 Inch Monitors VESA 75 and 100 Compatible Full Motion, Tilt, Swivel, Rotate, 66 lbs Capacity, Black

Product leaves monitor wobbly. I have my monitor rotated to portrait view so it would probably more secure set up landscape. Seem designed for that. Still would be wobbly in that position as well. It's all good as long as you don't touch it too much. I only kept it because i was desperate for an immediate solution. Gets the job done but...

When pulling this out of the package, the mount actually feels like quality metal. Sadly, that is where the good ends. The cons...1. Lacking necessary pieces- I have a S220HQlL, which is a monitor guaranteed to work with this mount. attempting to mount the display as specified it is immediately apparent that the screw required to attack the stem of the monitor is not in the bag. This would require you to go to a hardware store and figure out what screw works. If that were the only problem, then i would have just done that.2. Only use with like monitors- I bought this mount so that I could put this in my 4 monitor array (2x2). My new monitor (S220HQL) was bought to go alongside 3 of its predecessors (S211HL), which had VESA mounts built into the monitors (why did you stop that Acer). If I were able to mount this without using the monitor stem to get rid of that added height, the screen would still still a couple inches higher than the monitor next to it. You include the stem....forget about it.3. The mounts only make sense with multiple monitors that are side by side (and the same model). If you are trying to do a 2x2 or anything that involves another row, the space between would be bezel plus the stem height. The whole point of having a VESA mount it to cleanly line up displays and most efficiently use your viewing space. this mount misses so far on that objective that it's laughable.4. Bad hardware included. Even if you have fall within all of the contingencies that I specified for the the negatives, the screws and washers that are included are not sized properly. By that, I mean that the head of the screw and a literal hair bigger that the pass-through of the washer. If I placed a screw through a washer it would be supported. However, if tapped slightly to put the screw at an angle in comparison to the washer, the screw falls through. i would not trust that combination to mount my monitor. If you made it this far in the process and still want the mount, you will have to go to the hardware store to by washers that are a proper fit.In conclusion. I am better off taking my stand of the manufacturer provided pedestal and allowing it to rest on my office desk while leaning against the VESA mount that it was supposed to be mounted to. having an unsecured monitor sitting on my desk is better than using this mount. I hope this helps.