Sauder Edge Water Accent Storage Doors, Utility Cabinet, L: 28.19" x W: 19.45" x H: 29.02, Chalked Chestnut

My order arrived without damage, but missing a couple of screws. The start and finish of the assembly was simple, but I got stuck in the middle because I was putting it together by myself and it constantly flexed/wobbled. The cabinet only became reasonably solid when I nailed on the cardboard backing and retightened the cams. It was also tricky to get the rails on the drawer to slide together. Make sure you have the drawer tilted dow ward and pressure it behind the cabinet rails. Also crucial to make sure you have all 4 rails in the correct position. I am using my cabinet for a small coffee bar. It looks expensive and holds a lot of items without taking up too much space. This is the 4th Saunder item I have put together and the instructions are good and all the tools you need are insluded. The quality is quite good for this type of MDF furniture.

I ordered 2 of these to match my new desk, printer on one cricut on the other one. Lots of storage and a great look!

I hate building furniture. Sauder is usually very good at packaging parts and writing instructions, and this piece is a good example of that. Instructions are good, parts are organized, but you're still building the thing. Won't ding them on that, though, since I knew what I was getting into. Looks great. Very sturdy. High quality. If you don't hate building furniture and you need a stand like this, this one is very worthwhile.

Was kind of hard to put together idk if I did it wrong but the legs are not even and I had to put a shim under one. I still don’t have the drawer put together because I can’t figure it out I was expecting I little better quality but it is okay.

OKI know I see other reviews appear of the desk that's being rocky and it was at first. Once I put the backing on and finished the product this is pretty sturdy pretty tough. It even survived being transported to another location move around and set up in my office for my fish tank. It's heavy it looks styrdy and I believe it will do the job beautifully. The only problem I have is that I had a problem getting the drawer in. Make sure you get those screws down flush.

Instructions were clear, but I had a problem screwing in one of the feet. The pre-drilled hole was very tight, plus it wasn't drilled deep enough. I had a heckuva time with it. I had to re-drill the hole deep enough to accommodate the supplied pan-head screw. Still, the hole was too tight that the screw would not turn with a Phillips head manual screwdriver, so I ended up drilling the hole with a drill that was one-size larger (diameter). I ended up with the hole being too big. I had to purchase another (larger) pan head screw.The other problem is with the foot attachment itself. The hole is countersunk way, WAY too deep, requiring a very long screwdriver ( I have an electric drill with screwdriver attachments but they too, were not even close to being long enough to fit into the hole). It is very easy to strip the head of the screw of the pilot hole is too tight. It was a real pain.Also, this unit comes with a lot of parts. Nothing is pre-assembled. You have to virtually build it entirely from scratch. I am a senior citizen in reasonably good shape but this project gave me a real workout.However, once assembled, the unit look and functions great .But, would I purchase it again, given MY experience? No.

First I want to say the color is not black. It is a very dark brown. If you want black you're going to have to go someplace else. With that being said it is a sizable unit. I was glad to find a unit that could fit my 15-in wide printer. And I have plenty of storage for other office supplies.As far as assembly is concerned that did take a little time. One person about 4 hours. A portion of that extended time was simply to get the doors on. Very awkward with the supplied hinges. But once the hinges are on it works fine. Probably the most frustrating part was the little feet. I had to go through multiple screwdrivers before I could find a screwdriver that would fit in the pre-drilled hole. And then the screw just would not turn. I don't know whether the hole was not drilled wide enough or what. But a trick my dad taught me a long time ago worked. A little soap will do wonders. All in all once it was done it will definitely do the trick. It just took a little while to get there

This storage stand is nice; however, when it came time to put the knows on the drawer & door handles - there were no screws in which to do so. Now I need to go and purchase so I can finish putting together.

Cabinet is okay for my purposes

Suited my needs for a new piece for our newly painted master bathroom. I put it together - thought I would never finish but I got it done!! A little cheaply made but good for what we need.

Beautiful and well crafted (for the price) We are using it as a microwave stand and I like the easy pull out drawer and cupboard with shelf in bottom. You have to build it took hubby about 1 hour to build and said very good instructions for a change.

It's good for the price. Looks very nice. Good for my printer on top and files on shelves.

Arrived on time, well packaged. Assembly instructions are clear and concise, and the end result is a pretty solid, functional unit. This is not a high end piece of furniture (mostly chipboard and plastic film), but it's well designed, decent hardware, and imo decent value for the price.