Descripción
- This Power Sluice is a water operated, centrifugal concentrator and is capable of processing large volumes of material without the need for pre-classification. Existing sluice designs rely mainly on gravity to capture gold. With the CC690, not only is the force of gravity at work to trap gold, but the very force of the water itself is used to create high energy vortices that trap and hold gold particles against the matting. These forces combine to help the smaller particles work their way deep into the looped,vinyl fibers of the matting and on down to the grooves of the underlying v-ribbed rubber mat where they remain until it is time to do a clean up.
- This CC690 Power Sluice folds together for wheeling down to your dig site (legs and wheels store inside the troughs when transporting). It can then be quickly set up with no tools and there are no tiny parts to lose. NO pump or hoses included.
- Hungarian riffle assembly features aggressive angle riffles over heavy duty miner's moss and deep v-ribbed rubber matting in top trough. The 3/4 inch material that washes through the grizzly runs over some very aggressive aluminum angle riffles before dropping down into the bottom trough. The bottom has 2 sizes of expanded metal riffle sections: 3/4 inch and 3/16 inch heavy gauge aluminum. Top and bottom trough are 4 feet long by 1 foot wide. There is deep v-groove matting under heavy vinyl miner's moss under all riffle sections to securely retain any captured gold.
- Simple spray bar assembly and pivoting grizzly. The grizzly pivots to allow you to dump the large rocks out onto an inspection plate before they are discarded.
- Grizzly cross-spars prevent long, skinny rocks from getting through, and a flat plate on the back of the grizzly prevents material from being shoveled through the back. Frame is continuous around the whole grizzly.
The CC690 Power Sluice /Highbanker is 54 inches wide x 17 inches high x 15 inches; weighs 70 pounds. Pump and hoses NOT included.
You will need your own Gasoline Powered Trash Pump. Manufacturer recommends 6.5 HP, 3 inch gasoline powered pump with two inch hose fitting adapters.
Manufacturer recommends 50 feet of blue lay flat 2 inch discharge hose with swivel fittings
Manufacturer recommends 20 feet of clearflow 2 inch suction hose with swivel fittings
Made in the USA. Manufacturer provides 1 year warranty.
Ready to process a lot more material in a lot less time? Step up to this Power Sluice and get your share of the gold!
