BONTEC TV Wall Mount Tilting for 23-60 inch TVs, Low Profile Design, Max VESA 400x400mm, Holds up to 115lbs, TV Mount for LCD LED OLED Flat Screens, Fixed Ultra Slim Bracket Fits 16" Studs

"Fantastic Mount – Slim, Sturdy, and Easy to Install!"As someone who recently upgraded their living room setup, I was on the hunt for a TV wall mount that was both low-profile and reliable. The BONTEC Low Profile Tilt TV Wall Mount for 23-60 inch TVs absolutely delivered!First off, the "ultra-slim" claim is no joke. My 55-inch OLED now sits incredibly close to the wall, giving it that sleek, modern, almost picture-frame look I was going for. It really makes the TV blend seamlessly into the room rather than sticking out like a sore thumb.Installation was surprisingly straightforward, even for a DIY novice like myself. All the necessary hardware was included, and the instructions were clear enough to follow without too much head-scratching. I particularly appreciated that it's designed to fit 16" studs, which is a common spacing and made finding a secure mounting point a breeze. The tilt feature is also a huge bonus, allowing me to easily adjust the viewing angle to eliminate glare from windows or lights – a small detail that makes a big difference in comfort.With a loading capacity of 99LBS and support for VESA up to 400x400mm, I felt completely confident hanging my fairly hefty TV. The build quality feels very solid and secure; there's no wobbling or creaking whatsoever.If you're looking for a low-profile, tilting TV mount that's easy to install and feels incredibly robust, I can't recommend the BONTEC highly enough. It's a fantastic value for the quality and convenience it provides.

This mount did exactly what it claimed. Held my 65-inch TV securely without any fuss. Installation was straightforward, all the hardware was included, and the tilt function works smoothly. Once it’s up, it feels solid and low-profile. No wobble, no drama. Just a good mount doing its job.Highly recommend if you want something reliable and easy to install.

Great mount for my 32" Emerson LED TV (about 8 pounds). Wall bracket mounts to 16" on-center studs and TV bracket fit my 200x100mm VESA mount. My TV presented a challenge in that the back is not entirely flat and curves out a couple inches downward from the mounting holes. This kit provided numerous spacers which allowed me to raise the bracket 10-20mm out from the TV mounting area, which was enough to raise the bracket to clear the part of the TV case which curves out. The TV holes weren't deep enough for the long bolts provided in the kit so I needed to add 4 flat washers but I already had those. The vertical brackets were taller than I wanted and in the way of the near-ceiling position I wanted, so I cut those down with a sawzall (overkill, but quick). TV position is now ideal. Great value for this price!

Easy to put up.Even came with screws to mount bracket to tv!Great product.

Extremely easy to install comes with everything you need. Has a nice weight to It seems very durable.

The wall plate is designed to span two studs. Unless you have 8 inch or lower stud spacing it can't be centered on a stud. For standard 16 in stud spacing, it must be centered between two studs (for wider stud spacing it doesn't work). If you are picky about the wall position of the TV and wanted it centered near a stud, buy a different wall mount. With 400mm wide VESA the TV must be centered within 0.75 in of the center of the wall plate. Narrower VESA gives you more range to mount the TV off center on the wall plate, up to 4.7 inches to either side for 200mm and 6.6 in for 100mm. But you might want up to 8 inches off center before a different pair of studs would work better and you can't get that much with this wall mount.The L and R marked on the vertical pieces are from your viewpoint as you attach them to the back of the monitor (not from the completed orientation looking at the front of the monitor). A pair of pictures in the instructions makes that clear. If you have 400mm wide VESA, you must get L vs. R correct or it won't work at all. Several of the bad reviews say it doesn't work with 400mm VESA, one of which (saying it was done by a professional installer) shows it not working and clearly shows the L vs R pieces are reversed. My photo of this product attached to the back of my 50 inch TV with 400mm wide VESA shows it working well with L, R pieces correct. It also works for 400mm high VESA, but I don't have a photo of that. For narrower VESA, I don't think it is important to get L vs. R correct (unless you need the full flexibility for off center positioning). My photo (top down view) of the verticals attached to my 32 inch monitor shows L vs. R intentionally backward, because I think that works a little better for this monitor's recessed 75mm VESA mount.If you have power or display cord sticking straight back (as you see in my photo of my 32 inch monitor) that may be a problem. The cords as shown do not work. The monitor mounts slightly too close to the wall. I had a spare right angle power cord and I bought a right angle DPMI adapter, that would fix this problem. But for other reasons, I wanted this monitor an inch further from the wall and kludged standoffs between the monitor and the vertical pieces. For most monitors, the provided standoffs (much less than an inch) might add just enough for rear facing cords to work. But for most monitors you would need to buy longer screws for the standoffs to work. (Of course most TVs don't have this issue at all because the plugs are built sideways and only need standoffs if the back is curved). The provided standoffs don't work at all with the strange recessed 75mm VESA of my monitor.If you have a monitor smaller than 32 in, or you have 75mm high VESA mount, the vertical pieces will protrude as seen in the photo of the top of my 32 in monitor (75mm VESA). I wouldn't mind that because it is part of a bank of monitors that hide each other's mounting. But for a normal TV, this is likely a bad choice of wall mount for under 32 in and/or 75mm VESA. For 100mm to 300mm VESA on a 32 in or bigger TV there is enough flexibility in how you attach the verticals to the TV to hide them. For 400mm VESA, the verticals couldn't protrude even if you wanted them to.The wall mount screws look like you could use either philips or 10mm hex drive to tighten them. But, as mentioned in a few of the bad reviews, the screws are not high enough quality for the philips to work. The head will strip. The screws are plenty for holding a 50Lb TV on the wall (I'm not sure about the 99Lbs advertised). But you should use a 10mm hex drive, not a philips screw driver. Having put up a large number of similar devices, I would always use hex drive anyway (buying different screws if the ones provided were not hex drive). If you don't have a good stud finder and a ratchet set including 10mm, maybe this is not a product for you. (You still use a philips screw driver to attach the vertical pieces to the TV).

Simple installation, solid setup.

A very practical and economical option for your tv mounting needs. It came with several hardware options to adjust to your specific needs. Perfect size for small places, and sturdy enough for years of service. Comes with a level to help with installation. We are very happy with this purchase.