System Three 1600K20 SculpWood Putty Kit, 0.5 Gallon, Brown

While expensive, this epoxy putty works. I used it to repair a rotted door frame. After removing all of the rotted, punky wood I made sure only solid wood was left in place. Once mixed, the putty allows adequate working time to make sure the newly created void is completely filled without any gaps. The patch adhered to the surrounding wood just fine and is able to be sanded to blend it into the rest of the door frame. This worked so well I ordered a second batch of putty so I can repair some rotted window frames.

Why did you pick this product vs others?: Great product, easy to work with and apply and has lasted for years when used with Rot-fix to prep the repair area. Far easier to apply and shape than the caulk gun type epoxies, especially for vertical applications because its a fairly dry, lightweight putty and doesn't run or sag.

Just used it for the first time and will definitely buy again. I was wood carving a ram and for the life of me couldn't figure out how to carve the big horns. I finally decided to use wire. Then I figured some sort of clay. That's when I discovered this specific epoxy for wood. I wrapped it in wire and it's hard as a rock. READ DIRECTIONS! It wasnt working out at first until I reread directions. You have to mix it then kind of flatten it like dough and wait a good 15-20 minutes. At that point, it's not so wet and sticky so you can lift it and adhere it to what you need. It took me a few hours to make the horns because I layered it 3-4 times. With each layer, you need to wait half hour as well. So, give yourself time and if you expect it going in it's no big deal.

I used this for a broken chair a piece was missing This worked great It would not take the stain so I used this furniture markers close to the stain color I have on the chairs and it worked so well then I applied stain it's almost perfect

Good wood filler putty. It dries slowbut it is easy to work with.

My initial thoughts are all positive. First is that it mixes or kneads fast without a lot of flaking chunks falling off, secondly very good adhesion when used in conjunction with the penetrating epoxy hardener prior to application and it's easy to work with a putty knife, no flaking off while tooling. The one caveat is the smell but it dissipates as it hardens. I'll update if any negative results arise.

I have curved wood arm rests on an outdoor glider. No online replacement and I don't have wood tools to recreate it. Tried this product and it did the trick. Easy to use. It's easy to sand and paint after it hardens. There's no grain pattern to it, but no one is going to be looking that close!

I have used Sculpwood many times to repair cracks in widow frames and trim. Easy to work with, dries quickly and really seems to hold up. I am looking forward to using the smaller size package because the larger size has hardened over time (years) in the container.