Replacement Ear Pads Cups Cushion Compatible with Corsair HS50 HS60 HS70 Pro Gaming Headset Headphones Earmuffs (Style 3)

Great confort and quality product. Fantastic to replace your old worn-out cushions and give it a brand new feel and look.But it is an ABSOLUTE pain to install... Very, very difficult. Took me a solid hour to finally get these to fit inside. Here's how I did it. I HIGHLY recommend following these instructions in order to save yourself some stress:1. Get your old cushions out by using a knife to insert in the slot and twist it to get a plastic ring structure out. (Watch instructions video from this product info in this Amazon page.)2. Throw away your old cushions, but keep the plastic structure ring.3. Insert the plastic ring correctly in the headphones first, by aligning it correctly and pressing around until everything seems to be secured and in place.4. Grab one of the cushions and look for the seam in one of the sides (this will be your bottom side).5. Grab the thin leather fabric with both hands and stretch it by the bottom side.6. Insert the bottom leather fabric side first in the bottom slot side of your headphones. (This bottom side works a lot better because of its shape).7. Once it's inside, hold it in place with one hand. With your other hand go stretching the leather fabric from that point around the ear pad by trying your best to insert the edge of the fabric inside the slot. (It will start getting inside by itself, so it's not that hard). At first it works great for the areas around the bottom, but once you start finishing it won't get inside so easily or correctly.8. Finally, that's when you use a knife to help get the leather inside the slot correctly. Insert the tip of the knife in the slot areas where the leather fabric has not gone inside correctly and try your best to push the leather down with it. Worked very well for me.Hope it helps :)

These worked perfect on Corsair HS60 Haptic Gaming Headset. I have had these headphones for a few years and the original pads just wore out and started dropping small black pieces from the old ear covers everywhere. These are very comfortable, easy replace the original pads. They feel like great quality and so far appear to be holding up to extensive use.

Really good headphone pads. Comfortable and breathable. Blocks sound well As far as install It's super hard to do. There's to much material in between the plastics that need to snap together making it impossible to pull plastic ring put pads on then snap back together. Had to stretch pad and work my way around outside of ring using a cell phone pry tool to create the space needed to get the material to go into grove.

Nice quality and color. Easy to install.

These do not come with the ring to attach to your headset. i spent nearly an hour trying ot get these to fit however the faux leather is too thick. avoid.

These replacement earpads are slightly thicker than the OEM version, and are covered with an attractive soft fabric, which makes them more comfortable, and perhaps a bit cooler next to the skin as well. I think I will actually enjoy wearing them more with the new pads.What the new earpads do NOT come with is the plastic ring that allows them to snap on to the headphones. Like many, I spent a good deal of time trying to get the new ones installed. The instruction video literally shows you to remove the ring out of the old earpads, clip the ring (without the new earpads) back on to the headphones, then somehow slip the new headphones around that ring. Good luck with that - I tried that many times and finally gave up. After many attempts, I removed the plastic ring from the earphones, then inserted it into the new earpads before clipping it back on, and then mastered the art of getting my fingers inside the earpad at the exact spots where it clips on to the headphones, pushing slightly out, and somehow managed to get them snapped into place. It was time-consuming, frustrating, and extremely unnecessary. Save your sanity, and some time, and find an earpad that has the plastic ring included.

If you need replacement cups get these with confidence there is very little bad with them and they are much better than originals.My pair was a tiny bit smaller and thicker then original but none of that is issue because original cushions are enormous, to the point of being oversized(I do not have small ears by any stretch of imagination). these are a bit thicker but a bit softer so if originals were too tight it might be tighter but they are softer so cant say for sure if they'll feel the same.now the most important part, the original cushions are stuck to plastic rings with double sided tape and it is garbage, it lasted approximately 1.5 years and came of with absolutely no sign of wear, which hints at bad(actually really bad) design. thankfully these cups have different method of attachment and they just wrap round the rings tightly which makes it possible to replace them easily. now that I think about it you might even be able to replace them without disassembly just pull of old pair ad stretch new one around it(that is probably good idea because the rings are stock on small clips and they are very hard to clip off and even harder to clip on, only way I could reinstall them was to push the ring around pins with screwdriver, otherwise the rings are too flexible and pushing directly just bends them around small plastic clips.overall very please especially because they are better than the ones that came with headphones. the finish is not the best in the world and stitching is a bit skewed but doesn't really matter for indoor use.Overall very pleased and corsair should improve the design earcups lasting little more than a year is really bad.

I bought these to replace my son's peeling headphone pads. They were easy to put on his headphones, and he said they're comfortable. I'm very happy with my purchase.