SONAX PROFILINE Headlight Ceramic Coating (10 x 5 ml) Long-term ceramic sealing for plastic headlamps | Art-Nr. 02675410

Recommended by a detailer friend, I had my headlights polished to remove the milky discolouring and needed some form of headlight sealant with a decent amount of UV protection. Ordered the Sonax Profiline Headlight Coating from Amazon and gave it a try. There are 10 sachets in the box with each sachet covering a set of headlights. Application was easy, the instructions say to wipe after applying, then allowing the headlights 4 hours of sitting and curing and to refrain from washing the car for a week. I've followed the instructions to the letter and the results have been fabulous. Durability is up to 1 year in ideal conditions but it doesn't matter, I have 9 more sachets waiting to be used :)

Excellent, makes the plastic lens of the headlights and rear lights look newer and feel slippier compared to the paint. Depending on the condition of the lens, it can be applied without any prior polishing, after a light polishing with something like SONAX PROFILINE Np 03-06 (paint polish), or a more substantial work in case of badly deteriorated plastic.I used a plastic glove to spread the content of the sachet in order to stretch it to treat two cars, all lights around. It might be enough for three cars actually. If spreading with a tissue, plenty of fluid will be wasted, so use a glove or clingfilm. The fluid is oily. It covers any imperfections on the surface and makes them by far less visible. In 5 minutes the fluid begins to thicken - this is when you wipe it off with two kitchen towels, have several at hand. All together it takes 10 minutes to treat two cars.It feels like the coating will need to be reapplied every 3 months.

OK, my lights were not that bad to begin with - just starting to fade in a few small areas - so I thought I would buy this product just to stop them getting any worse. I used a little bit of T-Cut in the few places on the lights just to smooth them off a little bit first (5 - 10 minutes rubbing max). I then used the tip stated in one of the other reviews to use a piece of clingfilm to apply the liquid. I folded up a large piece of cling film into a small 10cm x 10cm 'pad' to use as an application 'cloth'. This stops the liquid in the sachet from being soaked up by a conventional cotton cloth. I then quickly applied a very small amount of the liquid to the lights and smeared it round with the clingfilm. EASY. Then I immediately used a separate polishing cloth to wipe off the excess liquid. I easily did the front and rear lights on my Mazda CX5 and had enough left to do the front lights on the Mrs' Renault.I left the lights for 4 hours as instructed and then checked out the handy work. I have to say that the lights look brand new - though of course they weren't that bad to begin with. If they are now protected for 12 months from further UV deterioration then I am a happy bunny.

Works excellent

As described by the seller.

Great product to complete my headlight restoration