Universal Printer Cleaning Kit Unblock Print Head Nozzles Cleaner Flush

This saved a multi-function printer that had been sitting for a long time. Using this with the provided instructions and some you tube videos, this restored the printer to perfect operating condition with an overnight soak of cleaner in the dried up print heads.Fantastic.

You Tube has instructions, but it was easy enough to figure out.On my printer it took a couple cleanings and still had to use the machines cleaning process on the print heads.

Used this to save my HP Work Force 3460 which has to be at least 5 years old and had NEVER been cleaned. it took several cleanings but in the end it worked and saved my a ton of money. I recommend every one get this kit and use it at least once a year your printer will thank you.

This is a joke. The bottle of cleaner is tiny, 3 inches by 1 1/2 inches. The tube is 3 inches long, too short to be functional. They did not send the needle.The instructions say to immerse the printhead nozzle and soak it in the cleaner but nothing about using the stuff you just bought. If I could do that I wouldn't need the syringe, needle and tubing!I was desperate, so I tried the tubing and syringe set up. The tubing can be connected to the yellow connector and the connector fits the syringe but the tubing isn't the right diameter to connect to the tiny pin that draws the ink from the cartridge into the Brother MFC printer. A total waste and now I can't return it.

After trying to clean the print heads in an epson printer and getting ink all over me and never getting it to print correctly, I gave up and got a different printer. Your experience may be different.

This actually works. Had a hard time with my epson printer until I used this solution. No more lines when I print. I cleaned my printer twice but that’s just me. Might not be the case for you.

I have never had a lot of faith in a bottle or can of "FIX IT". This stuff made me a believer! Follow the instructions and poof! I am amazed! My LF Printer is healed!

The system came with a syringe, clear tube, and an adapter. The tube does not fit on the syringe no matter how hard I tried. Eventually I was able to get the adaptor to fit directly onto the syringe but even this is not easy. I do think think the adapter would have fit on the tube. I was able to clean the nozzle, but that was only thanks to the design of the printer. I gave it a 3 for value for the money but honestly, for $19 I could have rigged up something and use IPA that would have worked as well.