Brake Line Tube Bender

Even though you can bend 3/16 copper-nickel brake lines by hand - this tool gives repeatable, smooth, professional looking bends. Used this to do an entire car and had no issues, a great value for the money.

Great product, work well

I was sent a used one that someone beat up and put back in the package, but it worked for what i needed....making a very tight radius bend in 3/16 tube. It's a great little tool, light duty. You can destroy it if youre not careful but for the price, i'd buy 2 of them. From a lifetime automotive professional. And yes, i'd much rather have a much better quality tool but in a pinch, it worked great.

I was skeptical when I received this tool. It was small and light so I didn't expect much. I was happily surprised. It bent the brake lines I was making perfectly. It was definitely worth the money and times.

This bender is a nice size. Gives a nice tight radius, about 1/2" to 5/8". Used for 3/16" NiCopp brakes lines and worked really good. Steel lines take quite a bit more force but doable with my weak hands. I've been happy with all the Capri tools I've purchased.

Works surprisingly well for solid 1/4" rod. I mounted the tool in a vice and put a pipe on the handle to get leverage as the handles are quite short, but the result was better than expected. The tool is aluminum so it may not hold up to this kind of use. Only drawback to this is that the bend radius is fixed. Hard to measure but I would guess the bend radius for the .25" slot is about .4"

It works but there are better options out there, it felt a little loose at the hinge area like if I put just a little to much pressure it would come apart but other than that it works and the price wasn't to bad either

Easy to use for my first time using one with 3/16 brake line.

I wanted to bend some brass pipe to run some wires through for a project. As such it was important to affect a bend in the pipe that didn’t “crimp” the pipe to the extent that the cable couldn’t be run through it. I bought these as they weren’t overly expensive to see if they’d do what I needed - they did. I should also note that I heated the pipe up with a blow torch before using the pipe benders and bent the tube whilst it was still hot.

Works very well. Can do up to about 100 degrees. Very simple to use. Highly recommend. Used for 3/16" lines and did exactly what was required

This tube bender works well for bending brake lines. Has good finish well made. It should last for years.

Lo compre solo por la posibilidad de doblar tubo 1/8, pero es muy práctico y se ha vuelto mi doblatubo principal, para tubería de 1/4 en refrigeradores y neveras.

It done the small job I needed it to do, anything more I word get a more “professional” tool