DEMASLED Pack of 4 - Kit for T8 light tube installation (2 Brackets + 2 Screws + G-13 Socket with 1.2m long cable) for T8 LED or Fluorescent bulb.

These did the job. I must warn other buyers of two minor shortcomings. The clips are too weak to retain the tube against even the slightest bumping or jarring. I used wire ties to hold the ends of the clips together to retain the tube securely. The lead wires are 20 gauge stranded wire. This is too fine to connect to 12 or 14 gauge house wiring with a wire nut. I wound up soldering a piece of bare 18 Gauge wire parallel to the ends of the 20 gauge leads and then wire nuts worked. Another option would be to solder the leads to house wiring.

Great innovation to turn a bare T8 LED directly into a simple light for under cabinet or workshop without buying a fixture. Reminds me of the old GE light-stick, only more flexible and 3 times as efficient.

Made with cheap plastic, but does work if you take it apart and solder an outlet plug to the ends. Basically it is not complete with wires for using right away to plug your lights into an outlet. You will have to modify the product.

These parts are ideal for mounting and connecting LED T8 tube lights in various applications such as under cabinets and closets. The quality is good for the cost.

working as expected. I did not tried hook but I tried wire part.I actually brought one led rod but was not able to start it. this kit make me use LED.You will need additional wire to extend it.

only enough ends for two bulbs instead of four, but you get enough holders for four bulbs.

Okay fluorescent tube holders

Finally got them installed after months and is like super nice to have them.

Vale quel che paghi...per bricolage consigliato