ANYCUBICPLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Texture Grey

This 1kg spool of PLA filament has been a dependable choice for my 3D printing projects. The diameter is consistent throughout the roll, which results in smooth feeding and clean, accurate prints. I’ve had no issues with tangling, and the filament loads easily into my printer without jams.The prints come out with sharp details, strong layer adhesion, and a smooth finish. It works well at standard PLA temperatures, and I’ve noticed very little warping even on larger models. The spool is tightly wound and packaged with a vacuum seal and desiccant, so the filament arrives dry and ready to use.At 1kg, the spool is large enough to handle bigger projects without running out mid-print, which adds peace of mind when tackling lengthy jobs. It’s a great balance of quality and value, making it an excellent option for both hobbyists and more serious makers.Overall, a high-quality PLA filament that delivers consistent, reliable results. I’ll definitely keep this brand in my printing rotation.

This is hands down one of the best filaments I’ve used! ANYCUBIC PLA lives up to its name—prints fast, with minimal stringing, and the quality is consistently smooth and clean. It feeds beautifully, sticks well to the bed, and handles overhangs and detail impressively. Great color and finish too. I’m seriously impressed and will definitely be buying more. Highly recommend for anyone running faster print speeds without sacrificing quality!

Worked just great for the beads I made for a model rocket based on a tiny bead design my granddaughter made for me. See the pic. My rocket and the tiny one she made for me. Note that the beads were made with this blue filament and also green filament.190 degrees C hot end, 60 C build plate temps worked great.

I've been printing for years, and this is absolutely the worst filament I've ever used. Before it totally clogs the nozzle, it starts coming out like cotton candy. Flow starts out good but gradually decreases during the print. The first print failed at the end of the second day of a three day print. I changed some settings as well as the tension on my direct drive extruder. I swapped out my hardened steel nozzle for a brass nozzle. I also changed my perimeters so the print would only take two days. Once again, everything started out fine, but when I checked the following morning, the extruder was floating around in mid-air with another big ball of cotton candy stuck to it.There's also a problem with bed adhesion. Prior to these two failed prints, I had four failed starts. The filament immediately started lifting off the print bed in the first attempt. I cleaned the glass bed and tried again, only for another fail. So I grabbed the hairspray, which didn't help at all, so I cranked up the bed temperature 10 degrees and along with the hairspray, that solved the adhesion problem.This stuff definitely isn't worth the trouble.UPDATE: So they sent me another roll of the exact same junk and I got the exact same results. Read every negative feedback and you'll see a recurring theme.UPDATE to the UPDATE: So it turns out that I had a direct drive extruder motor going bad. After purchasing a new printer, I decided to give this filament another try. It prints PERFECTLY on the new printer! My apologies to Anycubic for the bad review.

The filament printed well without issue and without breaking. The downfall is the cardboard reels that it is wound on. One spool had the reel bent and it didn't work well in my AnyCubic Ace Pro unit and kept jumping out of the track and binding up. Adding to the problems, the spool wasn't wound neatly and orderly, something that I value when buying filament.Everything else was good including the color consistency throughout the print and reel, the diameter was spot on with no issues presenting themselves as hang ups or misfeeds. Upon initial arrival the filament was put into my dryer and started off around 20% which shows that AnyCubic takes care to ship and store the filament well.