Sobre nosotros
Servicios al cliente
Atención al cliente
Acceso Regional
Legales y políticas
Obtén la aplicación
Apunta tu cámara para descargar la aplicación
Copyright © 2024 Desertcart Holdings Limited
The FlipToggle is the only single-strap design that takes the guesswork out of hollow-wall anchoring. Its unique design securely holds the toggle for easy insertion into the pre-drilled hole. Once inserted, the spring tab flips the toggle into the right position so that when the collar is tightened the anchor is ready for the bolt. No jammed toggles, broken straps or misaligned bolts. Key Features: Installs into drywall and hollow CMU up to 2 1/8" thick with a 2 1/2" bolt. Bolt size: 3/16"-24 thread. Simple one-strap design holds toggle perfectly aligned for easy bolt insertion The collar ensures centered bolt placement in the hole and does not embed the bolt into the drywall, eliminating the potential for sagging fixtures. Installation: FlipToggle installs in four easy steps: Fold, insert, flip and tighten -- it's that quick!The Anchor requires a 1/2" hole and a 10-24 screw (included 2-1/2" long)SpecificationsSAFE WORKING LOADS 2:1**Ultimate Tensile and Shear Strength Values1/2" Drywall - Ultimate Tension 67 lb (38 kg), Ultimate Strength 106 lb (57 kg)5/8" Drywall - Ultimate Tension 107 lb (52 kg), Ultimate Strength 188 lb (74 kg)Hollow Concrete Block - Ultimate Tension 415 lb (203 kg), Ultimate Strength 435 lb (204 kg)** Loads may vary according to the quality of the drywall or concrete hollow block.Warning: Use one-half or less of listed maximum values for safe working loads (as required by local regulations).What's in the Box?(10) Flip toggle anchors(10) 3/16"-24 UNC bolts Environmental conditions: Indoor, dry conditions Material composition: Polypropylene, Steel, zinc-plated, Plastic
| Thread Size | 24 |
| Number of Pieces | 10 |
| Compatible groove diameter | 0.19 Inches |
| Manufacturer | Simpson Strong-Tie |
| UPC | 707392589211 |
| Part Number | FT18250C10 |
| Item Weight | 1 pounds |
| Package Dimensions | 6.75 x 4.4 x 3.4 inches |
| Item model number | FT18250C10 |
| Style | Simple |
| Finish | Polypropylene |
| Item Package Quantity | 10 |
| Usage | Drywall, Block, Concrete |
| Batteries Included? | No |
| Batteries Required? | No |
P**B
Very simple, quick install, and exceptionally strong
One of the easiest products ever for mounting hardware to sheetrock and very secure. Only took us a few minutes to mount a TV and we were confident in the strength of the product. Great design for the DIY person.
J**Y
Almost too easy to use.
After reading the instruction and spending so time thinking about what they said (not much in words as the instructions consist mostly of pictures), I did my first job. About a factor of four quicker than toggle bolts, and much neater and stronger. No problems with breakage as it was clear that the long threaded tang would have to be brittle in order to break it off with your fingers (as shown in the instructions}. I was careful to push the toggle in with one hand pulling the tang straight out as the other pushed the plug/retainer in. Note that the plug retainer does not have to be tight, just snug against the wall.
D**S
it works
like it's ease — disliked how it sometimes doesn't break-off evenly — but a sharp tool finishes it-off….
J**E
These do the job!
I have a very large TV and getting it to say mounted to the wall was a challenge - it kept pulling out of the wall - these this are great and super easy to use!
L**N
Awesome Product
Wow!!! These toggle anchors are fabulous! So easy to install. After struggling to install regular toggle bolts I decided to try these for the remainder of my project. Boy, am I glad I did! These were so easy to use! I had the rest of the bolts installed in less time than it took me to install one of the original toggle bolts. I will never use the others again! My only suggestion would be a sheet of directions instead of the fine print on the side of the box.
M**R
Great product
My son pulled our towel bar out of the wall and I tried a few different anchors that just ended up cracking the sheet rock more. I really didn't want to repair the wall so I bought these and they were so easy to use and the towel bar is sturdier than how it originally was.
G**N
Good
Good
R**K
These work!!
Used these to hang a 50” TV over a fire place. Based on the reviews I ordered extra in case I experienced the same issues others had to say about them snapping off too easy and falling behind the sheetrock. This may have happened to people who aren’t very “handy” cause I had no issues whatsoever. I ordered 2 packs just to be sure I’d have enough. So I now have enough to last me forever…if I don’t forget where I put them. And that may have already happened since I just looked for them to see how many come per package and couldn’t go right to them. They aren’t lost, I just don’t know where they are.
A**S
Perfect - exactly as advertised!
This product is exactly as advertised.Note to the seller: What is missing from this description is a rating regarding the amount of weight it will support.
A**R
Dune the job
Easy to use.
M**
Works well
Works well, not that many for the price
R**L
Make sure no insulation behind plaster board as I struggled to get these to grip.
So after a false start with these, I managed to put up 2 radiators on a plasterboard wall. They are designer rads and heavy so I was worried about how good these would be.I needn't have worried as they are perfect and hold the rads very tight and sturdy.I did manage to find some insulation behind one section of the plasterboard which was an issue but in a clean area these are perfect. I certainly will use again
K**A
Check quantity before using
There were only nine anchors in the box instead of 10 and one of them was missing the toggle part.
Trustpilot
Hace 2 meses
Hace 2 semanas