🛠️ Fix it fast, fix it right—Stabond seals the deal!
Stabond Adhesive by NRS is a quick-drying, water-resistant glue designed for professional-grade PVC and urethane repairs. With a precise 10:1 glue-to-accelerator mix, it cures fully in 4 hours, making it the go-to solution for inflatable boats and water sports gear. Available in convenient 8 oz and 4 oz sizes, it offers a one-year shelf life to keep you prepared for any repair emergency.
| Brand | NRS |
| Specific Uses For Product | Inflatable Boat Repair, Watercraft Repair, Water Sports Equipment Repair |
| Material | Pvc,Urethane |
| Compatible Material | Rubber |
| Item Form | Liquid |
| Special Feature | Quick Drying, Accelerated Curing |
| Color | clear |
| Item Package Quantity | 1 |
| Package Information | Can |
| Item Volume | 8 Fluid Ounces |
| Viscosity | liquid |
| Full Cure Time | 4 Hours |
| Water Resistance Level | Water Resistant |
| Unit Count | 8.0 Ounce |
| UPC | 603403101116 |
| Manufacturer | NRS |
| Item Package Dimensions L x W x H | 12 x 9 x 1 inches |
| Package Weight | 0.32 Kilograms |
| Item Weight | 0.01 Ounces |
| Brand Name | NRS |
| Part Number | 38704.01.100 |
| Size | 8 oz |
R**E
Tips!
This is one of the products The Alpacka packraft people recommended for a strong bond. These are the lessons I learned in gluing on strap plates and D-rings. Stencil in with a dry erase marker what and where you want to glue. Use some type of masking tape be it blue or whatever on the boat and the plate. This will make glue spillover easier to clean up. My job was messy and just funky looking, but very strong! call the company whoever they are for measurements on exacyly where you should place strap plates, D-rings or whatever.
B**K
Very good pvc glue
I have a large towable inflatable raft we use at Lake Ozarks. The water is rough and we put heavy loads of kids and adults on it at speeds of 25 mph. Had a split in vinyl and patched it with Stabond. Used it 2 days with much abuse. It got another leak but the patch was fine. Stabond was great choice and I followed directions from videos on You Tube. Product has a shelf life of 6 months which isn't very long but the results were great.
C**E
Good Stuff
It did the job on my Zokiac: but as anything two part there is always doubts as to the mixology too much too little??? It also has a short shelf life. Get expensive if you only have a small patch
C**T
You must take your time
Very easy to use. Just follow the instructions and it worked great!
T**S
No cool guys!
Got out on the water and found there were NO mixing directions. No cool guys!
F**G
Best PVC flexable Glue
When using this stuff be patient, coat both pieces to be glued and let dry for 10-15 min depending on humidity and temp. Clean well with PVC cleaner mek 1st. If used in an enclosed garage, open those doors and use a gas mask!!!!
C**N
trusted bonding system
used for major problems with pvc boats. does the job and gives me peace of mind that it will hold my boat together when I'm out at sea
L**N
Great glue. Cannot use in small doses at a time.
Pros: Awesome glue.Cons: Only good if you're going to use all the glue at one time. The little glass bottle with the black cap (the accelerator) becomes cemented shut after a couple uses. I'm a strong man and have tricks for opening up tight lids and jars.Because this glue is pricey and cannot be used in smaller quantities at a time, I give it 2 stars.Without the accelerator, I've just used the glue in the tin. (You open it like a paint can.) So far it's been working alone by itself.My use: I glue the seams and patches for my inflatable boat.
Trustpilot
Hace 1 mes
Hace 1 mes
