SUNLP Guitar Bone Nut Saddle Bridge Pins for Acoustic Guitar 6 Strings or Folk Guitar Replacement Parts (White), Guitar Bone Strings End Pins or Bridge Pegs

Descripción

Size:Acoustic Guitar Parts Guitar Bone Nut Saddle and Bridge End pins improve sound quality of your Acoustic guitar! PACKAGE: 1pc nut + 1pc saddle + 6pcs strings pin + 3pcs FREE GIFT guitar picks MATERIAL: Cattle bone improve sound quality of your Acoustic guitar, will let your guitar has a brighter tone. And the special design of nut makes it more artistic and fix strings better. NUT SIZE: Length: 43mm (1.69”) X Wide: 6mm(0.24”) X Height: 9mm (0.35”). SADDLE SIZE: 72mm (2.83”) X 3mm (0.12”);Height: 1st string: 7mm (0.276”); 6th string: 8mm (0.315”)Simple Operations are as follows:HOW TO REPLACE NUTSTEP 1: Remove the strings& Score the current nut with exacto knife STEP 2: Remove the current nut with hammer and screw driver & Clean the slotSTEP 3: Size the new nut, polish it with 400-600 grit sand paper until suitableSTEP 4: Restring and check the action gapRestring the high and low E strings and tune to pitch to check for correct height.STEP 5: Sand back the nut to the perfect width  HOW TO REPLACE SADDLE STEP 1: Remove strings and old saddleSTEP 2: Fit the new saddleFit the new saddle into slot without forcing it. If it’s too thick, place a 240-400 grit sand paper on a flat surface and sand the sides of the saddle until it fits in the slot snugly but is easily removable that you can turn the guitar upside down without the saddle falling out. STEP 3: Adjust string heightPut your old saddle against the new one and align the tops. Using a pencil, mark a line along the bottom of your new saddle.STEP 4: Sand saddle to heightSTEP 5: Restring and determine correct string heightBy measuring the gap between the top of the 12th fret and the bottom of the low E string and tune to pitch to check for correct height.