[Pro Version] KIWI design VR Cable Management, 6 Packs VR Pulley System Compatible with Quest 3/2/1/Rift S/Valve Index/HTC Vive/Vive Pro/HP Reverb G2/PSVR/PS VR2 Link Cable

A perfect accessory to the the PSVR2. Because the PSVR2 is not wireless, the wires gets in the way. By using the product you solve that issue and this allows you to have a better experience because you don't trip over the wire. I opted with the sticky pads and they have been stuck for more than a year without any issues. Once attached, they are very easy to remove from the hooks on the sticky pads and be put away. You can change the tension and length of the wire and optimise the setup for your needs. The mechanism retracts smoothly and doesn't get stuck with quick movements.

As per title, a great addition to make high-end VR experience near-perfect. The difference between the cable running down your back having to drag it around and being basically wireless is night and day. There's nothing really to compare this to (other than hanging your VR set's cable on a ceiling screw). Sure, it doesn't matter as much for a stationary VR, but in full 360 VR it's incomparable. I've forgotten to clip on a single pulley and brushed my shoulder with the cable and gotten angry -- that's how much I'm used to it by now. 95% of the time, you forget it's there. It is not frictionless and you will still feel the pull, especially when walking in the very opposite direction when all pulleys and the whole cable needs to follow you (although my setup really makes that the most the cable can extend). And this is an extreme case for a 3mx3m+ play area. Basically, it does what it does really well in almost all cases. I tried both a triangle setup and a line setup and both work fine. I prefer the line simply because I end getting low a lot and that's several pulleys dragging the cable. I used all adhesive hooks on the ceiling to experiment, but one might need way more of them to actually test all sorts of setups. The build quality is excellent, I was really surprised by it given the fairly inexpensive price. The adhesives are really sticky. The wire is very responsive with just the right amount of "stick". The cable doesn't slide in the adjustable loops. The only minor nitpick is that the pulley can "jump" off the hook if you let it go from extended. This only really happens when you take the cable out and let go of the pulley. I don't have the option of leaving my headset hanging from a ceiling, so I have to free 2 pulleys, but it's really easy to do. The number of pulleys is enough, in fact, I basically only use 4 of them and that's having my cable extended almost as far away from PC as it will go. And you can easily swap them between hook anyway if you need to change something. I bought a second set for my other place and just in case I needed any spares (my heart couldn't handle going back to VR with a dragging cable).

I was honestly surprised with this one. I just got into playing some vr games, and quickly found that when playing PCVR having the cable on the floor is very very problematic at best and dangerous at worst. And so I looked around and found these pulley systems. I was a bit spectical at first but I was truly impressed. The build quality of the pulley's themselves were amazing, also I really like how they came in a pack of 6, although I only ended up using 3 for my small space. They do come with some adhesive hooks, although I ended up buying some "Command Strip hooks" Due to currently residing in a temporary residence. Which I would highly advice anyone else in a similar situation to do. As the hooks they provide will not come off easily. They also provide screw's and hooks incase you'd like a more permenant soluion. Although I would highly recommend trying a temporary solution as the set up did take some trial and error to find the most comfortable set up. I also recommed having atleast a 5m long link cable as that is really the minimum length to be able to play any game with movement being involved. Also a suggestion, i tied two of my pulleys in series in the last point, as I found this reduced the sensation of resistance on the headset, and improved mobility. One thing I will say is while the pulleys are quite smooth and quiet, if you have multiple pulleys set up and go far you will definetly feel the pull on your headset, esspecially if you just have the cable simply connected straight to your headset. I have a Bobo3 vr headstrap which i sort of thread the cable through. and that made any resistance be at the back of the headset rather than the front which made it waaaay more comfortable. With this setup the cable basically becomes invisible. I mean truly a game changer. I am very happy with this product and would recommend it to anyone looking for a solution to having cables tangle around you on the floor. If you don't see yourself playing any VR games that involve you turnig and moving around I don't see any reason to get this product though. Oh also one final note, I read a review where someone recommended putting some tape or some mark to indicate where the points of the cable you want to connect to each pulley, and it's a super dope trick, allowing me to set up and put away the whole system in minutes. all in all thanks for the great product KIWI !

so on the initial set up I followed the official guidance and set up the triangle with the ring in the middle which then attaches to an additional pulley in the centre. Right of the bat I could feel pulling and tugging, and had the cable catching and wrapping around my head. I was extremely disappointed. However I decided to persevere and play around with some different configurations. I ditched the triangle (as many others have done), went for more of a zig zag and doubled up the pulleys on some of the hooks to add counter weight and less pulling resistance. Eventually got it so that I could play a game that uses my entire3x3 room with very little noticeably pulling at the far corners and no more getting tangled in the wire. I also paired the pull system with the free TurnSignal app on steam, which gives you a visible indicator as to how twisted the wire is and allows you to untwist the wire (by turning around on the spot) without breaking immersion. Overall I'd recommend it, but just beware it will take some trial and error to get it right and you'll probably end up using all of the adhesive hooks on your ceiling during the process of getting it right

Absolutamente funcional. Tienen mucho cordón por lo que puedes usar 2x2 metros sin problema. Algo de ruido si hacen, pero bastante leve, y mezclado con el ruido del propio cable al chocar consigo mismo. Es imprescindible si quieres usar gafas con cable, ya que de otro modo pisas y lo puedes romper. De este modo, prácticamente desaparece, o al menos es la sensación que da.

Tystare än förra versionen, lättmonterade. Fungerar som förväntat. Rekommenderar att inte ha färre än 5st då man annars inte får bort sladden ifrån spelytan om man gör en cirkel utav 4st. Motverkar inte att sladden snurrar sig men det var inte förväntat av produkten.

Tal cual las fotos. Cumplen con todas las funciones que prometen y es de muy buena calidad.

Warning!!! This product is falsely advertised, it said 6 pack but they only sent 1 loop.

I`ve had these for over 2 years now and they work perfectly, they keep the cable out the way, they don`t sag to much and the distance on them is also pretty good