BBR TuningBlack Boost Bottle Induction Kit

looks great, perfect fitment, and it actually works not a gimmick! easy install would definitely buy again

10/10 this thing works, matched up with a BBR Boost Intake and an HP carb, definitely can tell a difference on mid range power, no more sputtering at low speeds, and accelerates much smoother over a stock setup on my 80cc china engine.

Looks great. Not sure if it is worth the price. Easy to install. Performance only slightly improved.

It looks trick but did not improve performance for me

Increase of speed runs alot smoother then before i have no complaints 👌🏾

This item was a total failure on my 80cc 2 cycle bike add-on motor. After installing this device, the engine operated in a very unpredictable manner. Often times, after engine warm up, the engine would "race" whenever I engaged the clutch (removed the drive load) and there was nothing I could do to slow the motor down, except to release the clutch to return a load. The throttle and kill switch would not slow down the engine at all. I believe this boost bottle created some type of "dieseling" effect, as the engine would continue to race even after removing the ignition input (i.e., press the kill switch). Also, I noticed no increase in power or reduction in vibration at full throttle.After removing this boost bottle, engine operation returned to normal. The throttle, kill switch, and engine idle now all function like they're supposed to. Use caution with this type of product.On the positive side, the bottle is nicely machined and it might work well for some alternate purpose, such as an ash tray or secret liquor storage!?!

It's a well made unit. Easy to disassemble for cleaning if it is ever needed. Nicely finished with good color. Bigger than other boost bottles I've used. I'm not entirely happy with the fit but no fault of the boost bottle. The nylon zip ties were fragile and cheap. So I have to get better zip ties. I also need an offset manifold that I can drill a bit differently and get the carb off to the side of the engine. The manifold I have now makes it hard to install the boost bottle due to the hose resting on the cylinder cooling fins. So I need to buy new better zip ties, mount the bottle under the tank and then cut the tubing to size so the bottle sits straight. and get it set up to scavenge on an offset manifold. It's not that hard but will take more time than I had planned on.

It really does give a good amount of boost!!!It's easy to install. You need a new manifold.I would say it gives a whole bunch of more horsepower. This thing is cheap and awesome. Looks cool. Don't believe the false reviews.