GGStudy 8-16 inch Two Handles 3 Holes Widespread Bathroom Sink Faucet Gold Basin Mixer Tap Faucet Matching Metal Pop Up Drain with Overflow

This faucet set is easily my favorite part of our new powder room. The design looks absolutely stunning – high-end and luxurious – and I still can’t believe I found them at such an affordable price. The gold finish is beautiful and gives the space a sophisticated, elevated look. We installed them ourselves, and the process was straightforward. The only thing to note is that the drain is just slightly cooler in tone compared to the faucets, but it’s subtle and not something most people would ever notice. It certainly doesn’t take away from how gorgeous the set looks overall. I'm writing this review several months after we got them, and they've held up just fine! Still looks brand new. Easy to turn water on and off, no leaking. Checks all the boxes!! If you’re looking for a statement faucet that feels expensive without the designer price tag, this is a fantastic choice.

I purchased 3 of these for my home. I ordered the first on a few months ago for my single sink bathroom. I liked the quality and ease of install. I had no problems with it and it looked really nice. A few months later, I decided to change out the fixtures in my double sink bathroom so I ordered 2 more. When the second set arrived, everything was the same except the drain set. Which was plastic instead of metal. I installed one with the new drain and for some reason it would not seal. I contacted the seller and asked if I could get the "older" version drain plug. They promptly sent out 2 sets and once they arrived, I installed everything with no problem. The company is very attentive and did a great job addressing my concerns. I don't think you can beat this fixture set for the price and quality you get.

Very pretty, great dimensions. BUT After two years the hot water handle wears down and will not have the nice hard stop when you turn it off. So, if you turn just a bit too far, water starts dripping out the spout. This is a constant struggle, turning it just ever so off so that it will not drip. Very bad for guests who do not know and it will just drip all day/ all night. I have to keep tightening the screw under the sink on the hot water valve (thats what I do in the video at the end), this loose screw exacerbates the dripping issue. I saw another review about this as well. The pop up drain, perfectly functional, great. But the material it is made of is cheap as when we try to clean it the veneer comes off and there is ugly matte grey plastic underneath that make it look perpetually grody. I show all this in the video. We have hard water, but I will say that is difficult if not impossible to get the buildup off of this faucet, whereas I have a nice name brand black kitchen sink that does not have this big of a buildup issue... jUst Sayin. Anyway, If you want something that will last over a year Do not do it! Buy a regulated name brand for ten more dollars!

This is a superbly well-designed faucet, and I am not referring to the looks, although appearance is excellent. I am referring to the fact that it utilizes screw-on compression-type fittings on the ends of the "Y" combiner hose, going from each valve to the center spout, giving a leak-free, secure connection on all 3 connection points.. I went through literal hell trying to install a previous look-alike from another vendor. We have an arrangement that utilizes a diverter valve screwed into the aerator to provide a bidet hose, much the same as a portable dishwasher connection. This means that the spout is always under pressure. The previous unit had push-on snap connectors, much like Delta and many others. When I installed the previous faucet, and put the spout under pressure with the diverter, the push-on connector to the spout immediately blew off, flooding everything underneath a pedestal sink in a second-floor bathroom. After much refitting, I finally got the push-on connectors to stay on, but they dripped profusely, since the spout was under pressure. Searched for faucets that had screw on connectors for days, but they were hard to find, as I had to look on the parts diagram for each faucet, until I found this one which worked superbly with no leaking whatsoever, even under pressure on the spout. It seems to me that faucet designers could design a faucet that doesn't blow up when you pressurize the spout. Is that asking too much? And I could not find any reference to this situation on the internet. Exasperated, until I found this GGStudy. Kudos! Most other mfgs like Delta use push-on. One exception is Kingston, which seems to use screw-on compression fittings, but more expensive. The first picture below is a diagram of the GGStudy (with screw-on compression "Y" Connectors), and the second picture is an example of a "Push-On" "Y" Connector that other widespread faucets use

They look super good and a great buy

The faucet and handles are both bery nice looking and seem sturdy but the drain nut stripped so could not get a tight seal. the company had to send out a whole new set, which was very easy to get in touch with them. The second one worked no problems. The water line hoses are a bit short and kink a little but still work.

Good product good seller.

The two cables that go into the hot and cold water rusted out and flooded my whole bathroom seeping thru the floor down into my kitchen, an expensive mess. One went last summer and i thought it was just a fluke. I couldnt replace just the one cable so had to rebuy the whole set and changed the cable.. was easy to change. Then this morning the other cable rusted out and flooded everything. Theres no real warning. Not sure why plumbing like this can rust so quickly. ..

جيد جداً

Me llegaron incompletas las mangueras en uno de los 3 que compre, solo venían 2 y tienen que ser 4

جودة عاليه

Muy bonitos, hacen el espacio elegante y atemporal

When looking for vintage-style taps for our modern vintage renovation, I came across these and immediately liked the look. The only catch. a photo in the listing clearly stating they’re not made for vessel sinks. So… challenge accepted. I built a custom riser to elevate the taps and spout to the proper height for the sink, and it worked out perfectly with no splashing at all when in use. Routing the hoses took a bit of creativity, but it was well worth the effort in the end. The taps themselves are very sleek, feel solid, and the fit and finish are exactly what I wanted. They suit the aesthetic I was going for beautifully and really complete the space.