LanskySuper C Clamp: Knife Sharpening System Mount - LM010

really helpful and fool proof way to get a really sharp blade.

Stabilizes the whole system. Works beautifully.

tengo una mesa que es un poco gruesa y el soporte no entra ahí para sostenerse tuve que conseguir una tabla no muy ancha para que se sostenga ahí de una manera un poco chapucera

Works great, a must have with the sharpening kit.

About two years ago I put my Lansky system in my closet and hadn't touched it since. I got tired of holding my knife and guide system in one hand and using the rod/stone in the other. I was not getting the results I wanted on my knives. I put some time into learning how to sharpen with a ceramic stone by eye and can say I can get a razor sharp edge with no guide. This took time and lots of practice to be able to keep the knife at the same angle both directions.So the other day I saw this clamp system in my local store and it peeked my interest since I make custom knives and I am constantly sharpening them and my friends knives. I ordered from Amazon and put it to use the first day it arrived. I can say that having the guide system attached to this clamp made all the difference in the world with the Lansky system. Even though I can do it by hand now, I like this for putting my first edge on my hand made knives. Instead of eying it, I can say the edge has been set at a --- angle to whoever I sell the knife too.My first fear was seeing how small the "knob" was where the guide system sits. I thought it might pop off while sharpening. And the thought of my knife falling onto my leg or foot kept running thought my head. So far so good, but I would still like to see a better or more secure way to attach it. I know it is meant to be able to pull off quick and flip the system over to do the other side of the blade, but there has to be something that can secure it and still have the quick disconnect.Other than that, it is a great system if you have or are going to buy a Lansky.

If you have the Langley knife sharpener, you need this clamp. It makes it easier to hold the knife down on to a flat surface such as a table. Only downside is that it has a little wobble when you tighten it down so your knife might move a little as your passing the stones through the edge.

Good well made product. Makes holding the knife clamp much easier and steady. Wish I would have found it years ago. My order was actually through “Kris Mon Stealth Rabbit “ . Amazing service. I ordered late on Wednesday the day prior to thanksgiving and received it on Friday the day after thanksgiving ! They obviously appreciate the business and get right to it. I had to double check to insure that I hadn’t checked the expedited delivery box. (I hadn’t). It was the normal free Prime service. I’ll definitely be keeping them in mind when ordering any similar things.

I have had a Lansky sharpening set for about 20 years, and through all that time just suffered with holding the blade clamp while sharpening knifes. I don't know why it took me so long to make this purchase, but glad that I finally did! The clamp is very sturdy and holds the blade clamp perfectly. The screw on pedestal fits on two sides so you can clamp it two different ways. It seems very well built and the blade clamp fits tight onto the pedestal. I can set this up on the kitchen counter, or even just a portable table and sharpen knifes while I watch TV. I would just about say this is a must have device when you purchase a Lansky set. Overall, I am very pleased with the clamp and would highly recommend this for anyone who has, or is planning on getting, a Lansky sharpening set.