Koozam DJI Phantom 4 PRO and V2.0 Case, Phantom 4 Advanced and Plus, Light Compact Hard Case

I'm going to make this as short and sweet as I can.The Case:The case is great quality. It has feet to stand on, both flat and upright and a very strong handle. It is made of hard plastic that I would not be concerned about being crushed or allowing damage to the drone and it includes two locks and keys (measly, but useful). The foam is very nice and protective, giving only a little bit to light pressure. I would not be scared at all of a drop or any sort of impact to the case. The latches are a bit weird, but work great. I like them.The Fit:Let me debunk everyones bad reviews. It is not Amazon or Koozam's fault that some don't research prior to purchasing, and upon arrival, isn't everything they dreamed of. This case is designed for the Phantom 4! The case will ALSO accommodate every series of Phantom 3 body. The body is not the fit issue. Where you will have the fit problem is ONLY the controller for the PHANTOM 3 STANDARD. Since the Phantom 3 Standard's controller is designed different than the others and the attached phone clip is mounted to the back of the controller, it will not fit PROPERLY in the case. However, I am not saying it won't go in the space provided. When the Standard's controller is in the case, the case will close, but you will have to stuff it a bit. Just like an overfilled suit case that will still close. Unless everything has to be perfect for you, it's really not a big deal and closing the lid won't damage the unit.The Conclusion: The case is amazing for the price. It allows you to put the drone in without removing the props (a huge plus). It is sturdy and tough. It has many cutouts for extra storage, including a tablet cutout. I hope you found this review useful. Advise, I am a professional photographer, who likes budget accessories because all of the other equipment is very expensive. I am also not going to protect my investments with complete crap products. I am very critical and I wasn't expecting a whole lot when I ordered this case. I am satisfied with it and my expectations have been exceeded.

Great case for the Phantom 3 advanced, it fits with the props installed and it latches well (nice latch design) . The case really looks good and is well made and holds a lot of equipment. The only issue, and others have mentioned it also, is that the batteries fit real loose this my be by design for proper cooling, the phantom 3 battery automatically discharges if left charged which creates heat .The case came in the usual tight fitting Chinese box with no protection place inside a large box with filler. It came in perfect shape because of the extra care taken by Amazon. There is no doubt if it was shipped in the single box alone it would have been damaged in shipping. I know, why am I bothering to mention what if scenarios, because it explains some of the bad reviews about not closing correctly. It may have been shipped to others in the Chinese box alone. Overall it is a good case and I would recommend it.

I didn't see a review of the compact case without prop guards and most of the dimensions supplied in the questions were inaccurate for this particular case.I ordered the case knowing that eventually I would like to take it with me traveling, including carrying it onto an airplane. I figured if the sizing was wrong I could simply return it.The case came without any damage and looks amazing. Very sleek looking and the foam appears to be of high quality. For those travelers, the dimensions of this case including the handle are 20.5"x16.5"x8.75". Southwests guidelines for carry-on are 24x16x10, so I shouldn't have a problem. Check other airlines for their carry-on policies as they are different.Now to the part that I'm a little concerned about. The compartments don't seem to fit the Phantom parts properly. The batteries are loose in their slots and the remote is pretty loose as well. I had to extend the iPad mount on the remote to hold is securely in place. The iPad slot holds my iPad Mini 4 with leather case perfectly with plenty of room for props (maybe 2-3 full sets not including the ones that stay on the phantom). I don't have any extra accessories, but there is plenty of room for all of them in this spacious case, and it even comes with dividers to keep everything separate if needed. In total there are slots for 5 batteries, plus one in the phantom. Obviously there is additional space if you have more than that.My only gripe with the case is that the batteries and remote don't seem to sit snug in the case. I closed the lid and carried it and the batteries didn't seem to slip much, but if the case was dropped, I wonder how the remote would be affected.Overall I am happy with the case, but not sure it meets my needs with the compartments. I'm going to try to make it work, but it is possible that I will return it.

Latch was broken on arrival, case is ok but dont depend on the latches to keep case closed. You will have to add some straps. You get what you pay for.

This does not fit the Phantom 3 Standard. The batteries and the controller are not the right size. The case itself is great looking but the foam they use is awful and started to fall apart almost immediately. The only reason I didnt give it one star was for its appearance. The case looks awesome and the locks feel solid, but the inaccurate description is a waste of my time and money.