NewYall AC A/C Compressor Flow Sensor for Toyota Sienna 2011-2016 Toyota Sienna 2011-2016 Highlander 2011-2013 Avalon 2013-2017 Avalon 2013-2017 GS350 2013-2015 ES350 2013-2016

Bought it because the a/c on my 2015 Sienna stopped blowing cold air. I figured it was inexpensive enough m, so I tried it. It was a pain to remove the old one, but once it was out it was a breeze. Although I feel it helped it needed to be combined with another part in order to make the compressor work properly. The value was right and the performance, just as anticipated.

I just finished changing it out. It took more time to get the old one out than putting in the new one. I recommend spraying with lubricant oil to help loosen it up. It fits perfectly. It would be better if a new snap ring was included but the old one works just fine with a little sanding off of the corrosion. This saved me over $3000 for repairs at the shop. Great value for sure!

Had a Toyota Sienna that wouldn't turn on the compressor, but it could be commanded on with a scanner. Looked at the flow rate in the live data, it was out of spec (I forget the specs). Put this bad boy on there and the computer was happy again. What a completely idiotic design. "Let's add complexity to the system to make it objectively worse." At least the fix was cheap.

It's work goodMy ac back to work

Have a 2011 Sienna, a/c compressor would not come on and no cold air. Dealer wanted $2300 to replace compressor, thought I’d try this sensor, worked like a charm! Pulled old sensor, plugged this one in and pressed it into the recess on the compressor, did not even use the retaining clip as it fit snug enough whereas I don’t really see it popping out, turned on a/c and compressor engaged and cold air flowed freely. Delivery was quick, great item!

After a lot of time I was able to remove the retainer clip (did not come with new clip) and had to dig out the old flow sensor. Once done the new part fit a little loosely although the A/C now works.

Junk,still active code .

Just connected this up to our 2015 Sienna, and the A/C is blowing cold and the B1479 didn't reproduce itself. Ended up just zip tying it to an A/C line since I couldn't remove the old sensor. So far so good!