1/2" x 1/8" LavaLock High Temp BBQ Gasket Smoker Seal for Nomex Door Lid, Self Stick Grey

Well I read all the negative reviews and I honestly believe now 99% of the negative reviews are user error. It sticks amazing when the surface is prepped correctly and there is instructions on the package telling you how to clean and prep the surface. It seals great after adjusting the hinges and tweaking the door to properly contour to the smoker body. The size and thickness is perfect and will contour to seems and imperfections after a heat cycle. And lesson learned that when you cut this MAKE SURE you have already pulled the waxed paper backing past where you cut because it's a nightmare to get the backing separated from the adhesive. All and all great quality and looking product when installed CORRECTLY.

Work great on my large, big green egg

Good gasket, will work but not correctly sized for replacement on Large Big Green Egg. This specific product is 1/2” wide. Correct replacement for full edge seal on Large BGE is 7/8” wide. My fault entirely for not measuring before ordering. Like I said it’s a good felt gasket and I have use for it on another smoker.

There was enough to do my 22in Kettle lid and my rotisserie attachment with a little left over. It made a huge difference in temperature control and keeping that delicious smoke in.

I bought this my Weber Kettle (22”), and for a Weber Smokey Mountain (18”), and the one roll sealed both cookers! I was very pleased that this product sealed up both cookers, stoping the lids from leaking smoke. I highly recommend that if you have a Weber Kettle and a Weber Smokey Mountain, you buy this to seal them up. I am very happy I got two cookers sealed up with one role! That makes it a good deal!

I installed this Lavalock High Temp Nomex gasket on a duel fuel Masterbuilt smoker. I believe my smoker is referred to as the 30" model. Reviews of the smoker say that installing a gasket turns the smoker from a good to a great system and I have to agree. I hesitated ordering this due to some of the negative reviews. Some customers are having issues with the gasket coming off even though they thoroughly cleaned, de-greased, and wiped the mounting surface with alcohol. I took a chance and ordered and am glad to say that I have not had this issue. In hindsight, I would have installed this prior to using my smoker but didn't know I would have issues with the smoker leaking. The included directions were good and clear on using a degreaser and alcohol and waiting at least 24 hours prior to using. I used a citrus (orange) based degreaser from Home Depot to initially clean the surface and then wiped it down with alcohol. I then adjusted the latches on the smoker so it fit snugly but not too tight to crush the gasket and waited 2 days before using it. I attached a photo of how it fit and looks on my smoker. On first use, the gasket greatly reduced and almost eliminated smoke escaping between the door and smoker. Instead of a steady stream of smoke escaping, I can barely see a faint wisp between the door and smoker from the hinge side of the door. I don't think tightening the latches further will help and I'm happy with how its working. I've used it twice so far for several hours with no evidence of it coming off. Overall, for the price, quality, and fit, I would highly recommend this product. It fit perfectly and works as designed. If anything changes, I will update this review.

Fits perfectly on my Z Grill pellet grill, which never sealed well. Just cut to size. I followed installation instructions and cleaned the edge very well with degreaser, then followed up with rubbing alcohol to prep the surface. I lined the door and the grill with the tape and let it sit overnight before running the smoker. The tape didn’t seem to stick well when I installed but after overnight it seemed secure. There is still one minor gap along one side of the door, but the rest of the door seals up perfectly (more of a grill design problem though). I noticed when I fired up the smoker for my thanksgiving turkey, the smoke comes out of the chimney (and grease hole) now instead of all over the place. But the biggest difference is temp control. I’m honestly shocked. I used to notice swings of +/- 25 degrees of my actual set temperature. With the LavaLock tape, it narrowed it down to +/- 5 degrees of my set temperature - when I set it at both 275 and 350. I expected a difference but nothing like this. Can’t wait to try this out on a brisket.

Both of my packages were not evenly wound and kinked and first one was opened The kink parts contained no glue on them so you could not use that length you needed I say both because I got a replacement on the first one thinking it was a fluke but when the second one came in the same So sadly both of mine were not rolled correctly and lost almost half of the roll to defects Not sure how its going to hold up ? But its being used on a pellet smoker The glue on the back does seem sticky though but again time will tell Also the lid I put in some small washers to space it up to compensate for the new thickness and does seem to seal very well