Weatherstrip Assy Door Belt Dew Wipe Seal Rubber Outer for Nissan D21 Hardbody Pathfinder Pickup Truck

recomendado

They are a hard fit, they are a little big

These fit right on for me on a 91 nissan d21 4X4 extended cad. They are a good solid product that came in a sealed heavy plastic tube. No bends at all. In an amazon box of course. Took me longer to clean up the rail they slide onto and the window glass. Years of dirt. Took a plastic putty knife and a small flat bar I have and slid the knife under bottom lip then slid flat bar up under old seal clear to top then used palm and bumped and pushed up and they came right off. Also it works best to reinstall with window down. There is a rubber tail on one end that goes towards the lock end. Put the mirror end in first with window down and it will slide right in the slot. I put the other end in so it's even with the old rubber. Now it seemed like it was not fitting correctly. I have a small rubber mallet and i just needed to whack the new seal a few good licks and it snapped right on down to make a good fit against glass. I read a review that said it didn't fit against the glass that's because they didn't smack it down. Do this with the window down of course. Mine fit so tight it's kind of hard to roll up the window. On the rubber tail end make sure and check to see if it has come loose. If it has get some black weatherstrip adhesive and reglue it had to do both mine. Very easy but make sure to let glue dry totally. Looked like they used some double faced tape that came loose. No big deal for me cause I've got lots of repair stuff. I also took some black sealer and applied that to the lock end seam. That is the end that was all rusted out on my old ones. The whole seal was toast actually. I watched a guy on you tube put the seal in backwards! He says hold on while I cut this off! You don't have to cut these! That's why I wrote this review. Good luck It's easy.

My truck still had the original strips which were cracking and revealing the underlying metal allowing them to become rusty. The old ones needed to be replaced. I pulled the old off and these new fit just like factory and look great. Took all of 5 minutes per each window. Glad I got them!

Took a little persuasion to install, but fit well and looks great!

For the price I expected a flawless product. Both came bent in hard tubular shipping container.

Excellent

It fits and looks better than the original worn-out original strips. As I could not find replacements in SA, I took the old ones off and the new ones with a little persuasion clipped on. Look great.