Metered PDU, 10 Outlets (8 C13, 2 C19), 200-240V, C20/L6-20P Adapter, 3.2-3.8kW, 12 ft. Cord, 1U Rack-Mount Single-Phase PDU, TAA (PDUMH20HV)

Needed this for a 19" rack. Super fast delivery. This pdu has no filtering or circuit breaker protection. It's very simple and was exactly what I needed.

This is being used for critical infrastructure use and it works great. Very solid and reliable. We will be buying these in the future. I wish I could try their other products when the needs arise.

The: Tripp Lite Metered PDU, 20A, 12 Outlets (5-15/20R), 120V, L5-20P / 5-20P, 110-127V Input, 15 ft. Cord, 1U Rack-Mount Power (PDUMH20) black; was the best choice for my custom built Portable UPS Cart project. It paired well with the 2500 watt, 120 volt, 20 amp hour inverter, with built-in transfer switch, that I needed to use for uninterrupted backup power to several devices. I especially chose a PDU with built-in amp meter readout display for monitoring the connected loads. The unit seems very well built and I already have an acquired confidence in Tripp Lite products that I currently own.

Got exactly what I paid for. Order did take a little longer because item was shipped directly from manufacturer But PC nation sent me a letter letting me know that shipping would take a little longer because it was being shipped from the manufacturer.

For the base functionality of delivering power to my home lab this guy is great with plenty of ports and no problems. I am still not sold on the back of rack design but this seems to be the standard so no points off there. Where this struggles is the UI and inaccuracy of the meters. I found that under 500W simply is not even registered and power usage tracking remains skewed even at multiple kilowatts. In short do not count on an accurate reading from this unit.

It's just a PDU, so not much can wrong. Minor nit: I bought this one because of the power usage meter. Mine stays stuck on 00. I suspect the meter is a stairstep reading, and if I loaded the PDU more I'd see something.

I’m not sure what’s up with some of the negative feedback on these units. Per the NEC, you can’t place a continuous load (defined as 3 or more hours of operation) on an over current protection device. The 24A max loading on these devices is there to protect would-be home electricians from violating the 80% loading rule, which = 24A on a 30A circuit. I’m not a licensed electrician, but worked for one for many years. If you’re loading an OCPD to 100%, both the wire and breaker are going to get hot- eventually leading to a trip condition. These protections are there to keep you from burning a house down. If you actually need a full continuous 30A, you either need two circuits- or a sub-panel. There are *very few* exceptions to this guidance, and almost nobody meets them (they also require a breaker rated for continuous load). The hardware works fine and does exactly as it’s supposed to do. Happy, and safe customer.

I've used Tripp lites for my rackmount computers in the past and thought this unit would work great in conjunction with their Tripp Lite HT1210ISOCTR Home Theater IsPRar Power Center w/ remote 12 outlets 5700 Joules power conditioner for my home theater rack (Omnimount RSF). With a receiver, some external amps, and all the sources / consoles I can plug in, I needed more plugs. This rackmount unit is well built, helps me monitor my draw and I can shut it down to avoid any phantom power draws (the game consoles love to suck power it seems). A solid option. And, in this application, I needed the plugs on the back versus a mix of front and back or all in the front, but that's because I wanted to hide the wall warts behind it in my rack. I prefer Tripp Lite to the more expensive Monster....plus, by rackmounting these, I get them off the floor, as I worry these get hot near the carpet.

Went a different way and returned it but very quility PDU shows amps and has all the c14 connections you would need to max out the amps

I have several of these and they work great. Obviously you need to draw at least 1 amp for the lcd to go from 0 to 1. No decimal places. The paint on this is a dark gray colour. Rack mount ears can be moved to the back if you need that. Update, after almost a year still 5 stars. Verified the meter with another device and it is definitely accurate

works great as my homelab PDU, gives a rough idea of power usage of my rack (its not terribly accurate, but its close enough to say "ok I doubled my power usage" has enough plugs for everything in the rack, cord is of a good length, I'm happy with it and will probably keep it for awhile

Sadly arrive damage

A considerar: El display muestra solamente amperes completos no podrás observar .5, .8 ó 1.5,1.7,1.9 es su lugar se mostrará 0 ó 1 respectivamente, en general cumple con su función.