FICBOX CB09 Graphtec Cutting Blade Holder Base with 21pcs (30/45/ 60 Degree) Vinyl Cutter Plotter Cutting Blades for Silhouette Cameo

Descripción

Color:CB09 Holder & Blades Product Specification: Length of Holder: 51.8mm Length of blade: 12mm Diameter (Clamp): 11.5 mm Diameter (Blade): 0.09 mm Material: Blade Holder: high quality aluminium; Point of Blade: high hardness alloy Degree of Blade: 30 degree(Yellow Cap); 45 degree (Red Cap); 60 degree (Blue Cap) Application: 30 degree blades: Cutting very small font & intricate line-art logos.(eg: any thin vinyl) 45 degree blades : Cutting general fonts, vinyl film.(eg: vinyl for traffic sign, flocks, etc.) 60 degree blades: Cut large fonts, thick materials for about 1mm. (eg: reflective material, masking tapes, etc.) Notice: 1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. 2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem. 3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder. Package Included: 1 x Blade Holder 7 x 30°Cutting Blade 7 x 45°Cutting Blade 7 x 60°Cutting Blade