DescriptionSEAFLO manufactures a variety of thru-hulls for your specific application. Our Thru-Hulls are meant for installation through the transom and are ideal for overflow use in livewell installations or as an exhaust port for a bilge pump. These thru-hulls are available in a variety of sizes ranging from 5/8″ up to 1-1/2″. Their construction is designed to resist degradation as a result of chemical and saltwater exposure.DetailsMolded white plastic with broad flangePer ABYC "Safety Standards for Small Crafts"NOT RECOMMENDED FOR USE BELOW THE WATERLINESturdy construction for long lifespanEasy to install and removeSimple to use
K**R
Not as advertised
This product was ordered for one inch. The thru hull starts out one inch, then tapers down to 3/4. We cannot use it and then realized it cannot be returned. Buyer beware!
D**A
Installation is simple and worked perfectly
Installed this drain in a Pelican Bass Raider 10E. Could also be used on other small plastic type boats. Used marine epoxy to seal and no leaks.
M**L
Outer flange to thin cracks very easily
Outer flange cracked on installation. Hand tightens only.
R**S
The thread length of 2 inches worked great as my boat has a thick hull
If your bass boat has a thicker transom like mine does this fitting works great, The first one I ordered was to short, I suggest when you pull your original fitting you measure the depth of the hole before you order one.
T**Y
Not 3/4" barb
This thing is not 3/4" at the barb, a 3/4 is loose and you can see that the hole is choked down. Packaging says 3/4. I bought a rule 800gpm pump with a 3/4 barb, my hose fits great and the actual hole is much larger.
R**D
Five Stars
Perfect replacement part. I will use you again. Thanks
B**
Boat.
Worked great for.my madtercraft boat.
S**Y
Works
Good product.
Trustpilot
Hace 1 mes
Hace 2 meses
