E251 Monokey Plate for use with flat or tubular style luggage racks only

Fit great on my 2024 KTM Adventure R. For continuous use of my Givi v47 hardcase.

I was not 100% sure which adapter plate to get for my 2022 Kawasaki KLR Adventure. I took the chance on this plate after doing a bit of research that did not provide perfect confirmation that this was the correct adapter for me. I needed an adapter to install a 58 L GIVI Outback Top Case. This fit the bill perfectly! When installing this adapter, I just skipped using the underneath brackets that are meant to hook over tubing. There are four holes in the factory plate that lineup perfectly with this adapter. Simply install using the four provided Allen bolts through those four holes. The bolts will just clear the plastic piece underneath with a bit of room to spare. Once installed, you can attach your GIVI top case and it will not block the factory panniers or the small compartment that holds your factory tool kit.

Great product, but a bit to expensive.

Mounted to a Royal Enfield Bullet 500, the plate fit well. Keep a sharp eye that the plate is not mounted too far forward or a passenger will have limited seating room. The biggest problem was getting the plastic cover plate on the Monokey plate. The screws tended to strip. Holes had to be carefully drilled through the plastic plate. Subsequently, with pressure on a power drill and a slow speed, the screws went in. There is a concern that the screws might be difficult to remove and they must be, from time to time, to check the mounting bolts under the plastic plate. Overall, a good value for the money , as it permits me to use my Givi Monokey trunk on my RE Bullet.

After looking at the prices for bike model-specific monokey mounts, I opted to save almost $100 and use this universal kit. Some comments... First, don’t let the fact that this is a plastic base concern you. It’s very solid and mounts nice and tight to the rack below. Second, install is very easy. I took the factory rack off, taped the mount to it to position it where I wanted it, flipped it upside down and installed it. Third, I was concerned that if I could bolt it on, someone could just unbolt it and take my case. However, the position of the bolts can be placed (at least on my bike) where no one can get to it. Last, the nuts that are used to tighten the mounting bolts are self-locking, but I always opt for a second but to be on the safe side.

Standard mounting plate for Monokey GIVI boxes. With this you can mount your box on anything with a horizontal rack (or vertical too I guess). I have five of them mounted on various motorbikes..and two Givi Boxes which ride on whichever motorbike I'm currently riding. Motorbikes: Honda: SuperCub, Trail 125, & DAX : Ninja 500, Yamaha TW200. :-)

Saves hundreds of dollars using this universal mount over BMW R1200RT specific mount. Took only 15 minutes to get it figured out (best place to grab flat stock vice round stock) and mount it. Very secure at 4 mounting points but I also took 1/4” black zip ties and zipped around the mount and BMW original mount in case anything came loose. I put bolts DOWN from top on tail side with nuts underneath but on forward side I came UP from bottom with bolts and put nuts on top. Used a “magnet on a stick” to help. Worked great but it’s a tight fit if you have big hands. Finished product looks good on the BMW. Way cheaper and more room than a BMW topcase.

I bought this one expecting to get a mushy and flimsy piece of plastic however I was proven wrong! The plastic feels very high quality and sturdy and is overall an affordable product. I ended up using the M8A plate instead since it’s fully aluminum and it worked out but definitely going to keep this one in storage for when that one wears out.

Lässt sich durch die vielen Montage- Möglichkeiten ideal ausrichten. So kann das Topcase perfekt zur Sitzbank ausgerichtet werden. Hält das Topcase bombenfest ohne das es klappert. Passendes Zubehör zum Topcase.

Fit my monokey hard case as described. I only had to remove the rubber stoppers so the case fit right. Enough holes and options to mount to aftermarket rack that’s on the bike. The quality of the plastic looks good and durable.

Qualidade Givi !

I wnated to get a different Monokey back box but had to get the plater as well, no biggie. Easily fitted and sturdy. Put my new back box on and went for a 'spirited' blast on the M25 for a few junctions, vame back, had a look at the box and plate, still rock solid. I did use some threadlock on the nuts, even though they are nylon locked I like to cover all bases!! Original Givi product, in a Givi box, great product. I will be getting the Givi foam back rest today so wifelet can lean back a bit more and stop grabbing me !!

Parfait