Searon Digital Hour meter of 12V 24V 36V 48V 110V 220V 230V AC/DC for ATV Lawn Mower Chainsaw Compressor Tiller Chipper Marine Farm Tractor Excavator

Added to Hustler Raptor 52. Perfect fit in the existing cut-out and already had the existing 2-wires hidden behind panel from Hustler. Plugged both wires with the quick connectors to the two terminals and it instantly started working (only two terminals on back of this meter). The display stays on 100% of time (before it was connected it was already on as shipped to me running off internal battery). When I turn the ignition to "ON" then the small hourglass starts flashing and counting time. This is useful as I already put an hour on the engine, so I could turn ignition to "ON" and leave engine off to help manually increase hours to make it more accurate. Once I turn the ignition back to "OFF" the hourglass icon stops flashing. If I press and hold the small button on bottom right (about 1 second) it goes to "TIMER 1" and another press to "TIMER 2". Eventually it then returns to the main hours. So think of the timer 1 & 2 as a trip meter essentially that you could reset for something like a service interval. Will probably put about 20 hours per season, so if I encounter any issues with functionality or reliability will report back here in the future.

Bought this hr meter trying to save a few bucks from what Toro wanted for their model. I used a file to ever so softly shave down one edge of the meter hole on the mower and changed out the stock plug with soldered speaker wire connections. It works perfect, looks good also.

I used this to replace the hour meter that originally came with my Ariens Ikon X-52 zero turn mower. The old unit was removed by simply disconnecting the two wires, and pulling up the old meter out. Reverse instructions for reassembly. I had it swapped out in under 10 minutes for an easy install. Now I have a meter that actually works, and can set separate timers to further track maintenance schedules for my mower.

Needed this to complete my Hustler Raptor control panel so I can accurately keep track of engine run time for oil & filter changes. Snapped right into the available cutout on the panel and works properly. The meter has an internal battery but I'm not sure if a charging current is supplied when in operation or not. All components are sealed in with a hard military grade resin so one cannot replace the battery. Quite pleased.

I love this one has 3 different readings. One count up and other two can be zeroed. press button 5 seconds until change. yeah i know its a bit to long for my comfort but it works flawless so no worries. i use it to bill for my machine time